Austauschbarkeit von Schaltketten bei Sturmey-Archer Nabenschaltungen: Unterschied zwischen den Versionen

Aus WikiPedalia
(→‎Siehe auch: weitere Verlinkungen)
(→‎Tabelle von Schaltkettenmaßen: Include aus Unterseite)
Zeile 30: Zeile 30:
S-A sxle with Bissell spring pin.
S-A sxle with Bissell spring pin.


==Tabelle von Schaltkettenmaßen==
==[[Austauschbarkeit von Schaltketten bei Sturmey-Archer Nabenschaltungen/Tabelle von Schaltkettenmaßen|Tabelle von Schaltkettenmaßen]]==


 
{{:Austauschbarkeit von Schaltketten bei Sturmey-Archer Nabenschaltungen/Tabelle von Schaltkettenmaßen}}
Spindle lengths are rounded to the nearest millimeter. Thanks go to Jan Blaha, Dan Burkhart, Tony Hadland, Elton Pope-Lance, Howard Sutherland, eBay vendor cyclingcolors_france and David Prosser of Sturmey-Archer for some of these measurements. Special thanks go to Bruce Dance for his many suggestions and corrections.
 
Click on the link below to switch the order in the table between part number and spindle length. You may have to double-click the first time.


==Siehe auch==
==Siehe auch==

Version vom 4. Juni 2019, 13:10 Uhr

In diesem Artikel werden Längen von Schaltketten für Sturmey-Archer Nabenschaltungen aufgelistet. Es besteht eine größere Austauschbarkeit als man zunächst annehmen würde. Obwohl eine kürzere Schaltkette schwieriger zu montieren und einzustellen ist, funktionieren sie solange die Kette bei vollständig entspanntem Zug nicht vollständig in der Nabe verschwindet. Eine längere Schaltkette funktioniert solange sie nicht vom Schaltzug seitwärts gebogen wird bei höchster Zugspannung. Bitte lies im Zusammenhang mit diesem Artikel hier auch den Artikel Techniktipps zu Sturmey-Archer Nabenschaltungen, in dem auch Montage- und Einstellanleitungen für Sturmey-Archer Schaltketten enthalten sind.


The table at the end of this article lists the various indicator spindles, along with the hubs with which they are meant to be used. A companion article describes how to determine the correct length of an indicator spindle by measuring hub parts. That can be useful if you can't identify the hub, or it is not on our list. We give indicator-spindle part numbers for some hubs from the 1930s and earlier, but for purts lists, you'll have to go to Tony Hadland's site or the Sturmey-Archer Heritage site.

Chapter 1 of Sutherland's Handbook of Coaster Brakes and Internally-Geared Hubs, on this site, gives more detail on indicator spindle lengths for hubs up through 1992.

And here is a table giving indicator-spindles for older and newer production of the S5/2 and AT5 hubs.

We still need measurements for a few spindles. Please feel free to send measurements in. We will credit you for your contribution.

Maße und Markierungen

Some spindles are thick, and are identified by through hash marks or Roman numerals. The effective length is from the base of the threads to the shoulder before the first link of chain (points of the green arrow in the image below).

Indicator spindle measurement

Spindles for most newer hubs are thinner, as shown in the image below. Some hubs accept only thin spindles. Each model of these newer spindles has a different-colored painted mark, which may be on the rod, or on the chain. Check the color of the mark under sunlight, because the blue and purple colors can easily be confused under indoor lighting. The red arrow in the image indicates the length from the base of the threads to the mark. No matter where the mark is, the length which most affects compatibility is from the base of the threads to the shoulder, indicated by the green arrow.

Thin indicator spindle

When using an indicator with paint marks on the chain, it is a good idea to make a mechanical markon the chain and/or to photograph the indicator: the paint is often obscured by dirt or simply falls off.


If you are using a spindle which is not standard for the hub, you will have to adjust it by testing operation of the gears, rather than by aligning the mark. That is a good idea anyway. Generally, the cable should be just short of taut in the tightest position. Exception: the S5 with bellcrank: the cable should be taut.

The hole in the end of the axle is large enough for a thick spindle, but there is an internal part with a smaller-diameter opening. The red arrow in the image below points to that part in a cross-sectional drawing of the axle. The part presses against a compression spring. The spring, in turn, pushes the clutch inwards against the outwards pull of the indicator spindle.

S-A sxle with Bissell spring pin.

Tabelle von Schaltkettenmaßen

Zapfenlängen sind auf den nächsten Millimeter gerundet. Danke an Jan Blaha, Dan Burkhart, Tony Hadland, Elton Pope-Lance, Howard Sutherland, eBay Verkäufer cyclingcolors_france und David Prosser von Sturmey-Archer für einige Maße. Spezieller Dank geht an Bruce Dance für seine vielen Anregungen und Korrekturen.

Die folgende Tabelle ist nach Teilenummer und Achslänge sortierbar. Durch klicken auf die jeweilige Spaltenüberschrift lässt sich die Sortierreihenfolge ändern. Standardsortierung ist nach Teilenummern.

Zuerst werden Schaltketten mit dicken Zapfen gelistet (fett). Danach folgen die Schmalen (kursiv). Die dicken Achszapfen funktionieren nicht bei allen Naben. Wenn die Länge passt, funktionieren die dünnen Zapfen bei allen Naben.

Teilenummer Nabentyp Nabe:
R-rechts
L-links
Achslänge Ende Gewinde bis Schulter (mm) Markierung Ende Gewinde bis Markierung (mm)
HSA125,
K.504
Ältere Nabe, Kurze Achse AW 5¾" 47-49 I 47-49
AG, AB
AT3 162,7mm
AT5 R 155,6mm
TCW 146mm
SAB 146mm
S5 5¾"
S5.1 R 5 13/16"
S5/2 R 5 7/8"
HSA126,
K.504A
Ältere Nabe, längere Achse AT5 R alle Zeiträume 6 3/8" 56 II 56
AW alt 6¼"
AWC 152mm
S3C 152mm
SAB 159mm
TCW 159mm
S5 6", 6¼"
S5.1 R 6 1/16,
6 5/16"
S5.1 L., SRF3 5 13/16,
6 1/16"
S5/2 R alle Zeiträume 6 1/8",
6 3/8"
S5/2 L vor 8-88 5 7/8",
6 1/8"
HSA315 Neuere Drei-Gang AW neu, SRF3 6¼" 59 III 59
AWC 159mm
S3C 159mm
X-RD3, AB3,
SAB3, S-RF3
163mm
SX-RK3 215mm
SX-RB3 215mm
TS-RF3 163mm
HSA316,
K.504B
Neuere Drei_Gang Rücktrittbremse
Fünf-Gang links
5-Star
AT5 L vor 8-88 6 1/8",
6 3/8"
62 IIII, IV 62
AWC 163mm,
6.4"
AWC(II) 163mm
S-RC3(II) 163mm
XL-RD3 177mm
TS-RC3 163mm
S5.1 L 6 5/16"
S5/2 L vor 8-88 6 3/8"
5-Star
5-Star Elite
HSA420 Neuere Drei-Gang Rücktritt mit längerer Achse. Fünf-Gang links S5/2 L nach 8-88 6 1/8" 66 V 66
AWC,
neue AW,
S-RF3
175mm,
7"
S-RC3, S-RC3(II) 175mm
QS-RC3 175mm
AWC(II) 175mm
S-RB3, AWB 185mm
HSA 421 Fünf-Gang links S5/2 L nach 8-88 6 3/8" 72 VII 72
AT5 nach 8-88 6 1/8",
6 3/8"
HSA453 Fünf-Gang 5-Star links 161,9mm 89 89
HSA615 ? ? ? 40 VI 40
HSA715 Scheibenbremse Drei-Gang S-RK3, S-RK3(N) keine Angabe 69 IX 69
HSA716 F30 Serie, Hybridschaltung CS-RF3 179mm 75 VIII ? (Markierung auf Kette)
CS-RK3 179mm
HSA317 Kugelverriegelung
Fünf-Gang
X-RD5, AB5 185mm 59 Hellblau 59
HSA490 1990er, Verschlusstück
Fünf Gang
Sprinter S5 67 Rot 64
Sprinter Elite/AT5
Sprinter S5C
SAB-5
Nicht AB5
HSA585 Verschlussstück
Fünf-Gang
X-RC5(W) 175mm 71 Gelb 68
S-RC5(W)
SRC5(N)
XL-RD5(W)
X-RD5(W)
X-RF5
S-RF5(W)
HSA651 Verschlussstück
Fünf-Gang
S-RF5(W) 148mm 57 Grün 63
S-RF5(N)
HSA652 Fixed Gear S3X mit kurzer Führungsmutter 165mm 62 Orange nach 1/2 Kettenglied 68
HSA653 Fixed gear S3X mit kurzer oder langer Führungsmutter 174mm 62 Weiß nach komplettem Kettenglied 76
HSA712 AB (neu) 175mm 61 Marineblau 67
HSA713 Fixed_Gear S3X - lange Führungsmutter 165mm 61 Orange nach komplettem Kettenglied 71
HSA714 Fixed-Gear S3X - lange Führungsmutter 174mm 71,5 Weiß nach 1/2 Kettenglied 75,9
HSA717 Neuere Fünf-Gang X-RF5(W) 185mm 71 Lila 76
S-RF5(W)
mit HMN420 kurzer Führungsmutter;
X-RK5(W)
X-RK5(N)
S-RK5(N)
S-RK5(N)

Die Teileliste für die AB5 auf der Sturmey-Archer Heritage Website gibt als Teilenummer HSA490 für die Schaltkette an. Das ist ziemlich sicher falsch wie auch einige andere Teilenummern. Außer für die 90mm Trommelbremse und den Stahlkörper sind die gezeigten Bauteile in der Zeichnung identisch mit der X-RD5. Beide haben einen Kugelverschluss und die korrekte Schaltketten-Teilenummer lautet HSA317-


Siehe auch

  • Sturmey-Archer documents at the Veteran Cycle Club Library.
  • John Allen's spreadsheets of internal-hub gear ratios
  • SW Hubs by Brian Hayes
  • Jane Thomas's site with Sturmey-Archer service manuals.
  • Menotomy Vintage Bicycles
  • Chat forum on English bikes.

Quelle

Dieser Artikel basiert auf dem Artikel Sturmey-Archer Indicator Spindle Compatibility von der Website Sheldon Browns. Originalautor des Artikels ist Sheldon Brown.