Cookie Consent by Free Privacy Policy Generator

Nabenschaltungstheorie: Unterschied zwischen den Versionen

→‎Trends: weiter...
(→‎Siehe auch: ergänzt)
(→‎Trends: weiter...)
Zeile 169: Zeile 169:
Es gab ernsthafte Zuverlässigkeitsprobleme mit einigen aktuelleren Sturmey-Archer Naben. Diese werden im Detial im Artikel [[Sturmey-Archer Naben]] besprochen.
Es gab ernsthafte Zuverlässigkeitsprobleme mit einigen aktuelleren Sturmey-Archer Naben. Diese werden im Detial im Artikel [[Sturmey-Archer Naben]] besprochen.


These days, all internal-gear hubs except the Rohloff and the Shimano 11-speed are grease-lubricated and lack an oil port. Grease is imperative with hubs that include a coaster brake. With most hubs, it is still possible to add oil in one way or another without disassembling the hub. It is often also advisable to relubricate a new hub before putting it into service-- see advice here. All in all, the trend has been toward less user maintenance, at the cost of more frequent service intervals and vulnerability to water contamination. Many users will simply run a hub until it malfunctions, and manufacturers have responded to that by producing hubs which have "permanent" lubrication.
Heutzutage sind alle Nabenschaltungsnaben außer der Rohloff Speedhub 500/14 und der Shimano Elfgang-Nabe mit [[Fett]] geschmiert und haben keine Öl-Einfüllöffnung. Fett ist bei Naben mit [[Rücktrittbremse]] zwingend notwendig. Bei den meisten Naben ist es auf die eine oder andere Weise möglich, dennoch Öl einzufüllen, ohne dass man die Nabe demontieren muss. Oft ist es angeraten, die Nabe vor Inbetriebnahme noch einmal zu schmieren.  
 
;Siehe auch
Several other trends decrease serviceability compared with the classic three-speeds
* [[Alles_über_Nabenschaltungen#Schmierung|Abschnitt über "Schmierung" im Artikel "Alles über Nabenschaltngen"]]
Alle in Allem geht der Trend in Richtung "weniger Wartung durch den Fahrer" auf Kosten von häufigeren Serviceintervallen und Anfälligkeit gegenüber Wassereindringens. Viele Fahrer fahren die Naben einfach, bis sie versagen und Hersteller regieren darauf, dass sie Naben mit "lebenslanges" Schmierung produzieren.


Mehrere andere Entwicklungen verringern die Möglichkeiten der Wartung gegenüber den klassischen Dreigang-Naben:
*    Bearing cups and ratchets are pressed, rather than threaded, into the hub shell, and non-replaceable. If a bearing cup is worn or corroded, the hub shell must be replaced, generally requiring replacement of the entire wheel.
*    Bearing cups and ratchets are pressed, rather than threaded, into the hub shell, and non-replaceable. If a bearing cup is worn or corroded, the hub shell must be replaced, generally requiring replacement of the entire wheel.
*    The entire internal mechanism must then fit through the outer bearing cup on the right side, and so that cup must have a larger diameter than any internal part, one reason that sealing against dirt and water isn't as good as it used to be. Another reason is that most dustcaps of newer hubs are less sophisticated than the double labyrinth seals of old Sturmey-Archer hubs.
*    The entire internal mechanism must then fit through the outer bearing cup on the right side, and so that cup must have a larger diameter than any internal part, one reason that sealing against dirt and water isn't as good as it used to be. Another reason is that most dustcaps of newer hubs are less sophisticated than the double labyrinth seals of old Sturmey-Archer hubs.
15.321

Bearbeitungen