Nabenschaltungstheorie

Aus WikiPedalia
Artikel wird Übersetzt
Dieser Artikel wird gerade übersetzt. Bitte etwas Geduld haben und später erneut versuchen.

Dieser Artikel beschreibt beginnend mit Dreigang-Naben wie Nabenschaltungen funktionieren und arbeitet sich zu komplexeren Naben hoch. Es werden einige Trends beschrieben und Empfehlungen ausgesprochen. Verlinkungen zu anderen Artikeln verweisen auf Informationen zu den speziellen Modellen, die besprochen werden.

Siehe auch


Allgemeines

Nabenschaltungen sind bei Fahrrädern bereits vor dem Jahr 1900 zum Einsatz gekommen. Mehrere Unternehmen bauen sie heutzutage noch. Sturmey-Archer hat ein Erbe, das bis in die erste Hälfte des 20. Jahrhunderts zurückreicht, Shimano baut Nabenschaltungen seit 1957 und Rohloff ist ein vergleichsweise neues Unternehmen, die eine technisch hochentwickelte Nabe herstellen. SRAM mit seinem Erbe, das auch ins frühe 20. Jahrhundert zurückreicht, hat die Produktion von Nabenschaltungen 2017 beendet.

Nabenschaltungen sind im Allgmeinen etwas schwerer und weniger flexibel als Kettenschaltungen. AUf der anderen Seite sind Nabenschaltungen robuster, weniger empfindlich bei Verschmutzungen und können auch bei stehendem Fahrrad schalten. das ist insbesondere im Stadtverkehr interessant, wo man allzuoft anhalten und anfahren muss. nabenschaltungen sind schon seit Anfang an indexiert. Manche bieten sogar einen Rückwärtsgang an. Dieser ist im Fixed Gear Betrieb und auf Trikes von vielen Fahrradfahrern gewünscht.

Nabenschaltungen erlauben den Einsatz von vollständig umschließenden Kettenkästen - anders als es bei Kettenschaltungen möglich wäre. Diese verlängern erheblich die Lebensdauer der Kette und verhindern das Verschmutzen von Kleidung. Auch kann man Nabenschaltungen problemlos auf Riemenantrieb umrüsten.

Schaltmechanismen

Viele Nabenschaltungsnaben haben eine oder zwei Stößelstangen, die längs in die hohle Achse der Nabe eingeführt werden und jede eine Passfeder eingreifen, die aus einem Schlitz in der Achse hervorragt und innenliegende Elemente der Nabe längswärts entlang der Achse bewegt. Die Stößelstange ist mit dem Schaltzug entweder über eine Zugkette oder einen Umlenkhebelmechanismus am Ende der Achse verbunden. Sturmey-Archer nenn diese Kombination aus Stößelstange und Kette Schaltkette (Auf Englisch indicator spindle).

Eine Sturmey-Archer Schaltkette

Sturmey-Archer Schaltkette

Viele neuere Naben führen den Zug um eine Umlenkrolle innen am rechten Ausfallende vorbei, wo er eine Manschette bewegt, die konzentrisch um die Achse bewegt, die eine Sperrklinke oder eine Rastklinke aktiviert. Manchmal wird auch eine Schaltnocken bewegt, der einzelne Elemente längswärts entlang der Achse bewegt. Bei Rotationsschaltung wird die Zugverbindung besser geschützt, dafür wird der innenliegende Mechanismus komplexer.

Die Sachs Elan 12 Gang Getriebenabe hatte Rotationsschaltung, bei der Schaltstangen gekippt wurden, die die Achse rundherum einschlossen. Dabei wurde eine Sperrklinke aktiviert, die entweder über die Schaltstangen herüberglitt oder in diese eingriff, wie man es unten im Bild erkennen kann.

Sachs Elan Sperrklinke in Achse verankert

Die klassische Regelung einer Nabenschaltung war ein Hebelaufbau mit einer Klemmung, die an jeden Lenker montierbar war. Manche Naben haben einen Drehgriffschalter, den man ausschließlich an aufrechte (also gerade) Lenker montieren kann. Dropbars haben eine etwas größeren Durchmesser. Für manche Naben gibt es Lösungen am Ersatzteilmarkt und Selbstbaulösungen sind natürlich immer denkbar.

Sturmey-Archer Schalthebel (Für deutsche Übersetzung der Anleitung bitte Bild anklicken)

Anleitzng zu einem Sturmey-Archer Schalthebel

Planetengetriebe

Alle gewöhnlichen Nabenschaltungen haben ein Planetengetriebe, das in seiner einfachsten Ausführung folgendes enthält:

  • Ein einfaches zentral platziertes Sonnenrad auf der Nabenachse.
  • Ein Planetenkäfig mit drei oder vier Planetenrädern, die um das Sonnenrad herum platziert sind und in dieses eingreifen und zusätzlich eingreifen in
  • ein Hohlrad, das die Zähne innenliegend hat.

Schnittzeichnung einer Sturmey-Archer Dreigang-Nabe

Schnittzeichnung einer Sturmey-Archer Dreigang-Nabe

Vorteile

Einfache Planetengetriebe haben einige wichtige Vorteile gegenüber ördinären Stirnradgetrieben:

  • Die Last wird auf die drei oder vier Planetenräder von außen auf das Sonnenrad und das Hohlrad verteilt, was die Kräfte auf die einzelnen Zahnräder verringert. Daher kann man den Aufbau kleiner und leichtgewichtiger bauen. Drei Planetenräder teilen die Last gleichmäßig auf - in etwa wie ein dreibeiniger Hocker. Bei vier Planetenrädern wird aus dem tangentialen Versatz zum Ausgleich der Last zwischen zwei sich gegenüberliegenden Planetenrädern ein radialer Versatz der beiden anderen Planetenräder. Die Lastverteilung ist zuerst ungleichmäßig bis die Nabe eingefahren ist. Selbst dann kann sie ungleichmäßig sein, weil sich die Achse unter Gewicht und Kettenspannung biegt.
  • Das Sonnenrad, der Planetenkäfig und das Hohlrad sind gleichachsig, so dass eingehende und ausgehende Kräfte einfach durchgereicht werden oder am Getriebe vorbeigeleitet werden, so dass man hohe, gleiche (1:1) oder niedrige Übersetzung erhält.
  • Weil der Planetenkäfig im symmetrischen Mechanismus "schwimmt", überträgt das Getriebe Biegelasten und Reibungswiderstand nur auf die Planetenräderachsen und nicht auf die Nabenachse. Biegelasten auf die Nabenachse werden trotzdem aufgebracht, weil der Fahrer Gewicht mitbringt und die Kette unter Spannung steht.
  • Obwohl jedes Planetenrad in zwei andere Zahnräder eingreift ist Kraftübertragungsverlust minimiert, weil sich der Planetenkäfig langsamer in die gleiche Richtung wie die Planetenräder dreht, so dass die Geschwindigkeit, mit der sich die Planetengetriebelagerkugeln bewegen müssen und mit der Zahnräder ineinandergreifen und wieder lösen reduziert wird. Effizienz wird später in diesem Artikel noch einmal detailliert betrachtet.

Einschränkungen

  • Ein einfaches Planetengetriebe mit einem stationären Sonnenrad kann keinen Übersetzungssprung aufwärts von mehr als 2:1 darstellen - die Planetenräder würden sonst infinitesimal klein werden und unendlich schnell rotieren müssen; ein Überstzungssprung abwärts kann nicht kleiner als 1:2 werden. Während man durch übergehen des Getriebes eine 1:1 Übersetzung darstellen kann, wäre das Achsgetriebe infinitesimal klein für Übersetzungen nahe an 1:1.
  • Ähnlich verhält es sich, wenn man das Hohlrad stationär gestaltet und das Sonnenrad den Planetenkäfig antreibt. Dann muss die Übersetzungsbandbreite zwischen Null und 1:2 liegen, jedoch nicht nahe an den beiden Grenzen. Wenn der Planetenkäfig das Sonnenrad antreibt, muss die Übersetzungsbandbreite zwischen 2:1 und unendlich liegen - jedoch wiederum nicht nahe an den jeweiligen Grenzen.
  • Die dritte Möglichkeit wäre, den Planetenkäfig stationär zu halten, bietet nur Rückwärtsgänge an und wird ausschließlich bei wenigen Getriebenaben für Trikes eingesetzt.

Verbreitete Dreigang-Naben: Sturmey-Archer, SRAM, Shimano

Die gewöhnlichen Dreigang-Naben von Sturmey-Archer, SRAM und Shimano haben ein einfach abgestuftes Planetensystem, bei dem das Sonnenrad auf der Achse fixiert ist. Schaltteile führen die Kraft durch das Pkanenetnsysten entweder in die eine oder andere Richtung, um herauf- oder herunterzuschalten, oder den Nabenkörper für die 1:1 Übersetzung direkt anzutreiben.

Sturmey-Archer bietet Dreigang-Naben mit Keilverzahnungen für Shimano Standardkassetten an, damit man ein mehrgängiges Hybridschaltungssystem zusammenbauen kann. Diese Naben eliminieren den Bedarf an einem Umwerfer und sind besonders geeignet für Laufräder mit kleinem Durchmesser: Der obere Gang vermeidet die Notwendigkeit für ein übergoßes Kettenblatt. SRAM bietet seit 2017 keine Nabenschaltungsnaben mehr an.

SRAM DualDrive Dreigang-Nabenschaltung mit Kettenschaltungs-Kassette
(wird nicht mehr hergestellt, aber Sturmey-Archer verfolgt ein ähnliches Konzept)

SRAM Dualdrive hub

Zusammengesetzte/abgestufte Planetengetriebe

Ein Planetensystem kann abgestufte (zusammengesetzte) Planetenräder haben. Ein zusammengesetztes Planetenrad besteht aus zwei oder mehr Zahnrädern, die nebeneinander auf der gleichen Achse laufen. Sie bestehen aus einem Stück, so dass sie sich mit der gleichen Geschwindigkeit drehen. Jede Sektion hat eine andere Zahl an Zähnen. Der eine Satz greift in das Hohlrad und in ein Sonnenrad ein. Jeweils ein anderes Sonnenrad greift in eine andere Sektion des Planetenrads ein. Festsetzen des einen oder anderen Sonnenrads erzeugt eine andere Übersetzung, so dass man die Möglichkeit erhält, auch Übersetzungen darzustellen, die mit einem einfachen Planetengetriebe nicht zu erreichen wären. Die meisten Naben mit zusammengesetzten Planetengetrieben haben eine "neutrale" Position zwischen zwei Gängen, weil es nicht möglich ist, zwei Sonnenräder gleichzeitig auf der Achse festzusetzen. Dieses Problem ist schwer zu vermeiden, wenn der gleiche Antriebsstrang sowohl für höhere als auch niedrigere Übersetzungen genutzt werden soll, weil die Sonnenräder nicht in beide Richtungen frei laufen können. Es müsste also eine separate rückziehbare Sperrklinke für jede Rotationsrichtung geben.

Ein abgestuftes Planetenzahnrad

Ein abgestuftes Planetenzahnrad

Zusammengesetzte Planetenräder müssen synchronisiert werden, damit die alle Sonnenräder richtig greifen. Anderenfalls sind die Zähne, die in das eine Sonnenrad greifen, nicht mit denen synchron, die ein anderes Sonnenrad greifen. Dadurch wird unruhiger Lauf erzeugt und es besteht die Gefahr von Beschädigungen. Die Planetenräder haben normalerweise eine Markierung, die anzeigt, wie sie ausgerichtet werden sollen. Die Einkerbung im Bild oben ist ein Beispiel für eine solche Markierung. Im Bild unten sieht man die Synchronisation von Planetenrädern einer Sturmey-Archer Sprinter 5 Nabe während der Montage des Planetenkäfigs. Die (Punkt)Markierungen müssen alle direkt nach Außen gerichtet sein.

Einstellung von zusammengesetzten Planetengetrieben


Sturmey-Archer und Sachs/SRAM Fünfgang

Sturmey-Archer und Sachs/SARM haben mehrere Modelle von Fünfgang-Naben hergestellt, die ein einfach abgestuftes Planetensystem hatten. Niedrige, 1:1 und Hohe Übersetzung werden wie bei der Dreigang-Nabe eingestellt. Zusätzlich haben die hohe und die niedrige Stufe je zwei Gänge.

Die schmale Seite jedes Planetenrads greift in das Hohlrad und in ein Sonnenrad ein. Das dickere Ende greift in ein anderes schmaleres Sonnenrad ein. Wenn das größere Sonnenrad mit der Achse verschränkt wird, arbeitet die Nabe wie bei einem einfachen Planetengetriebe. Sobald das kleinere Sonnenrad mit der Achse verschränkt wird, wird eine engere Bandbreite (der Übersetzung) angelegt.

Frühe Sturmey-Archer und SRAM Fünfgang-Naben hatten einen Schaltstößel und einen Schaltzug auf der rechten Seite für die Funktion abwärts-1:1-aufwärts und einen weiteren solchen Aufbau links für die breite-enge (Übersetzungs)Funktion. Neuere Fünfgang-Naben brauchen nur noch einen Schalter und einen Schaltzug. Das ist einfacher für den Fahrer/Monteur, bedeutet aber eine kompliziertere Verbindung zum innenliegenden Mechanismus.

Sturmey-Archer und SRAM Siebengang

Sturmey-Archer and SRAM 7-speeds (both now discontinued) are very similar to the 5-speeds, except with 3-part stepped planet gears. The ring gear engages the middle set of teeth of the planet gears. With all of these hubs, the smallest section of the planet gears must have enough teeth for acceptable strength and wear life, limiting the hub’s range.

Mehrstufige Planetengetriebe

Multi-stage planetary gearing offers more flexibility than single-stage gearing, at some expense in efficiency.

Alle drei Stufen rotierend

In one approach, all three elements of a planetary system are in motion: the sun gear is turned forward or backward by a second planetary system. Several mid-20th century narrow-ratio Sturmey-Archer hubs used this approach to achieve ratios near unity. Intended to appeal to racers and avid recreational cyclists, these hubs had only three or four ratios, and lost out in the market to derailers, which could offer narrow steps, but also, more ratios. The very elaborate Sachs Elan 12-speed hub from 1995 also had all three elements rotating, as did the SRAM i-Motion 9 -- both now discontinued.

Stufen in Reihe; Shimano Nexus Siebengang

More than one planetary stage may also be used in series, overcoming limitations of single-stage planetary gearing -- a common approach with newer hubs.

The first common hub to use stages in series was the Shimano Nexus 7-speed.

This hub uses two stages. The first stage gears down, and the second, up. Each stage has two-part compound planet gears and two sun gears, offering two different ratios, or a unity ratio. In the middle three of the hub’s seven gears, power passes through both stages, and so the hub does not use the unity ratios of both stages at once; rather, it achieves a near-unity ratio by gearing down and then up through two ratios that are nearly complementary, avoiding an awkward shift.

The Nexus 7-speed was the first common hub with rotary shifting. Though often praised for its smoothness of shifting, its protected cable connection and its even progression of ratios, the Nexus 7-speed has been criticized for low efficiency in the middle gears, and for short wear life due to the small sun-gear pawls. Newer models of this hub may have improved reliability.

Stufem die nur aufwärts oder abwärts schalten und die 1:1 Übersetzung

Only to gear up or gear down (besides unity ratio) is usual with 2-speed hubs, some of which shift when the cyclist backpedals – making them especially suitable for take-apart and folding bicycles where a cable would pose a complication.

Sturmey-Archer Fixed-Gear Naben

But also, Sturmey-Archer once made, and now (2010) has again introduced, a three-speed fixed-gear (non-freewheeling) hub. The fixed-gear hubs only gear down, because the planet cage, which drives the hub shell, must be permanently attached to it. Because there is no freewheeling, these hubs must have a "neutral" between gears.

Shimano Nexus Viergang

The Shimano Nexus 4-speed hub has a unity ratio and three increase ratios. It uses three sun gears, each meshing with a different set of teeth of the compound planet gears. If no sun gear is locked to the axle, the hub operates in its lowest, direct-drive unity ratio. Each of the other sun gears selects a different higher ratio. The pawls that drive the hub shell in the step-up ratios override those for the unity ratio. Like the 7-speed, the 4-speed has a rotary cable connection. There is no "neutral" gear: the hub defaults to a lower gear if the next higher one is not het engaged.

Shimano Nexus und Alfine Achtgang

The Shimano 8-speed is very similar to the 4-speed, but has a preliminary stage which either operates at unity ratio or gears down, doubling the number of speeds. This hub’s sequence of ratios is rather uneven; the steps from first to second and fifth to sixth are wider than the others, due probably to the difficulty of achieving a ratio near unity with a single stage. Efficiency is highest in the fifth gear, which is unity ratio.

Sturmey-Archer Achtgang

The Sturmey-Archer 8-speed hub has three simple planetary systems, each with a different increase ratio. The hub achieves 8 speeds by using 1, 2 or all 3 of the planetary systems in series, or bypassing them all for the unity ratio. Consequently, the lowest gear is most efficient, and the top gear, which uses all three planetary systems, least efficient. On a conventional bicycle, this hub must use an unusually-large sprocket and a small chainwheel, but on the other hand, this hub is especially well-suited to a bicycle with small wheels.

Schnittmodell einer Sturmey-Archer X-RD8(W) Acht-Gang-Nabe mit drei Gangabstufungen (rechts nach links in der Illustration)
Schnittmodell einer Sturmey-Archer X-RD8(W) Acht-Gang-Nabe mit drei Gangabstufungen (rechts nach links in der Illustration)

The first model of this hub offered had a total range of 3.05. The current (2010) version has a total range of 3.24, and steps of approximately 14% except for the outermost steps of 30%. A second-lowest ratio closer to unity would require a small sun gear that would reduce reliability of the hub. Shifting is by locking none, 1, 2 or all 3 of the sun gears to the axle. When a sun gear is unlocked, the stage operates at unity ratio. When a sun gear is locked to the axle, the stage gears up, overriding the pawls used for the unity ratio. There is no "neutral" gear, as the hub defaults to the next lower gear. This hub uses a rotary shifter-cable attachment inside the right-side dropout.

Rückhaltloser Aufbau: Sachs Elan und Rohloff Speedhub

The Sachs Elan, no longer available, was the first internal-gear hub which tried to rival modern derailer gearing. It has its own page on this site.

Sachs Elan Zwölfgang-Nabe

Sachs Elan Nabe

The currently-available Rohloff Speedhub has 14 speeds, with even steps of 13% each and an overall range of more than 5 to 1. The Rohloff is marketed as a replacement for a wide-range derailer system, competitive in terms of weight and efficiency, and superior in reliability.

Schnittmodell einer Rohloff 500/14 Speedhub

Schnittmodell einer Rohloff 500/14 Speedhub

This hub has three planetary stages, from left to right in the illustration above. The first and second stages have two-step compound gearing with identical tooth counts. The first stage only gears down and the second stage, up. Seven of the nine possible gearing combinations are used; the two unused combinations would provide unity ratios but would transmit power through both sets of gears.

The third stage has its input at the sun gear and output through the planet cage, transposing the entire range downward to double the number of available ratios.

The Rohloff Speedhub is the most versatile, and by far, the most expensive internal hub available as of this writing. It revives desirable features of the classic internal-gear hubs – oil lubrication, weight-optimized construction – but it prices itself out of the urban-cycling market. Rohloff engineering of a hub with 7 somewhat more widely-spaced speeds would be an interesting prospect.

Shimano Elfgang

As of late 2010, Shimano is offering an 11-speed hub. It is oil-lubricated. Examination of drawings and drive ratios shows it to be similar to that of the 8-speed hub, with a first stage that can gear down or operate at unity ratio, and another stage that gears up. The middle gear, however, is not at unity ratio. The first stage has helical-cut gears. No sample was available for inspection at the time of this writing.

Trends

The general trend among internal-gear hubs has been toward greater complexity and expense, though simple 3-speed hubs still are available.

The classic Sturmey-Archer 3-speed hub was very economical if the owner oiled it occasionally and kept the cable adjusted. Oil washed out and soiled the shell, but kept the internals clean. This hub could be serviced quite easily with widely-available and inexpensive parts. Some Sturmey-Archer 5-speed models also were reliable, as long as the owner replaced the stock shifters with a pair of Sturmey-Archer trigger controls. Thes older Sturmey-Archer hubs had a "neutral" gear between 2nd and 3rd, and could freewheel forward if the cable was misadjusted -- see comments by Jobst Brandt. That problem is resolved with current hubs of all brands.

Current SRAM and Shimano 3-speeds are simple and rugged, as are SRAM 3, 5 and 7 speeds -- though the (discontinued) SRAM i-Motion 9-speed proved unreliable. SRAM has recently introduced (and now withdrawn an 8-speed and a different 9-speed whose design is simpler and appears more promising. Early Shimano 3- speeds could not withstand hard pedaling. The Shimano 7-speed would sometimes skip forward after a couple of years’ use. The 8-speed improves over the 7-speed, but is rather complicated.

Reliability issues with some recent Sturmey-Archer hubs have been serious, and are discussed in more detail in our main article about these hubs.

These days, all internal-gear hubs except the Rohloff and the Shimano 11-speed are grease-lubricated and lack an oil port. Grease is imperative with hubs that include a coaster brake. With most hubs, it is still possible to add oil in one way or another without disassembling the hub. It is often also advisable to relubricate a new hub before putting it into service-- see advice here. All in all, the trend has been toward less user maintenance, at the cost of more frequent service intervals and vulnerability to water contamination. Many users will simply run a hub until it malfunctions, and manufacturers have responded to that by producing hubs which have "permanent" lubrication.

Several other trends decrease serviceability compared with the classic three-speeds

  • Bearing cups and ratchets are pressed, rather than threaded, into the hub shell, and non-replaceable. If a bearing cup is worn or corroded, the hub shell must be replaced, generally requiring replacement of the entire wheel.
  • The entire internal mechanism must then fit through the outer bearing cup on the right side, and so that cup must have a larger diameter than any internal part, one reason that sealing against dirt and water isn't as good as it used to be. Another reason is that most dustcaps of newer hubs are less sophisticated than the double labyrinth seals of old Sturmey-Archer hubs.
  • Hubs with more ratios are more complicated, expensive, heavier and difficult to repair.
  • Most bike shops don't have a mechanic who knows how to rebuild these hubs -- though instructions for most are online. The usual repair is to replace the hub's internals in their entirety.
  • Increased interest in internal-gear hubs has led to a wider variety and to hubs with more ratios. But also, it has led to frequent model changes, and to reliability problems with some hubs. Parts for some hubs only a few years old are no longer available.

Effizenz

High efficiency is important in a bicycle drivetrain. Let’s consider the factors affecting efficiency in a simple planetary system. We’ll use the example of the common Sturmey-Archer 3-speed hub, with 20-tooth sun and planet gears and a 60-tooth ring gear. I'll give only that one example here; others may be developed similarly.

Consider a single turn of the driver (the input from the sprocket), resulting in 1 1/3 turns of the hub shell, in the top gear. The driver is connected to the planet cage. As the driver makes one turn, each planet gear makes two turns as it circles the stationary sun gear, but only one turn on its axle – because the axle is rotating forward with the planet cage; also, only one turn relative to the sun gear, because it is circling the sun gear in the same direction it is turning.

The planet gears advance the 60-tooth ring gear by 20 teeth.

So, all in all, for each turn of the driver, the gearing involves gear tooth contact losses due to:

  • One turn of the planet gears relative to the sun gear. These gears are of the same diameter.
  • 1/3 turn of the ring gear where it engages the sun gears. The same number of gear teeth – 20 – engage and disengage as between the sun gear and planet gears, but more teeth engage each planet gear at once, and they engage and disengage more slowly because the ring gear is an inside-out gear.

Properly-formed and aligned teeth of spur gears are in rolling contact, without sliding.

In addition, there is the drag on the bearings.

  • The planet gears make one turn around their axles, which are loaded by the tangential force resulting from torque from the driver at the axles’ radius. Other forces more or less cancel due to symmetry, with each planet gear contacting the sun gear and ring gear at two locations opposite one another.
  • The cup-and-cone ball bearing between axle and hub shell at the left side bears about ½ the weight load on the rear wheel and little of the pull from the drive chain; the hub shell turns at the output rate, 1 1/3 the rate of the driver.
  • The smaller (outboard) cup-and-cone ball bearing on the right turns at the rate of the driver, and bears about ½ the weight load on the rear wheel, as well as a most of the pull of the drive chain.
  • The larger (inboard) cup-and-cone ball bearing on the right, between the driver and the hub shell, is in relative motion at 1/3 the rate of the driver but has a larger diameter, increasing the linear speed between its races. This bearing also bears about ½ the weight load on the rear wheel, and a bending load due to that weight and the pull of the chain. This bearing uses smaller bearing balls than the axle bearings, 3/16 inch rather than 1/4 inch.

The gears and bearings, then, add some drag compared with a single-speed system, but on the other hand, an internal-gear hub does not have drag from the chain's running over derailer pulleys or from chain misalignment.

Research has shown internal hubs to be somewhat less efficient than derailer gearing, but they make up for that in urban cycling with their ease and speed of shifting. The direct-drive middle gear of an internal hub should in theory be very efficient, because power is transmitted directly to the hub shell. In practice, this gear does not always prove to be much more efficient than the others, for reasons not yet determined.

Older internal hubs, as well as the Rohloff and the Shimano 11-speed, use light machine oil for lubrication, keeping drag low. Many newer hubs have more than one gearing stage, and use grease, making them less efficient.

A comprehensive study of internal-gear hub efficiency was conducted by Dr. Chester Kyle and Frank Berto, and published in the journal Human Power, issue #52. It makes an interesting comparison with the examination of derailer-gearing efficiency in issues 50 and 51. Efficiency increases as chain tension or applied power increases. Kyle and Berto show lower efficiency than manufacturers claim – though it is still impressive – for the Rohloff hub. For derailer gearing, the results in issue 50, showing lower efficiency for smaller sprockets, are overturned in issue 51, when recalculated to apply to the same power, at the same wheel rpm.

Die richtige Wahl der Gangschaltung

Wide-range, narrow-step derailer gearing (or the Rohloff hub – at a high price) makes bicycling more accessible in steep terrain, when carrying heavy baggage and for weaker riders. But for most urban utility use, a hub gear, if properly chosen and set up, has advantages that well outweigh those of derailer gears.

The single-speed bicycle and the classic, overgeared three-speed were the mainstay of urban cycling for decades, but they limited the utility of bicycling. It is no coincidence that urban cycling has been most popular in cities that are very flat – Amsterdam, Copenhagen, Berlin.

Even in such cities, single-speeds and overgeared three-speeds are unable to accelerate smartly or to adapt to different challenges of wind, baggage and cyclist strength. Many utility bicycles also have had only a coaster brake, with stopping distance twice that of a bicycle with a front brake. Bicycles with only a rear brake may legally still be sold new in the USA and the Netherlands, though not in other countries of the European Union. The coaster brake also impedes quick restarting by making backpedaling impossible, and it overheats on long downhill runs.

I understand that dual handbrakes, usual for decades in the U.K., France, the USA and Canada, are now capturing an increasing share of the market in northern Europe. Sometimes the rear brake is a disk brake, drum brake or Shimano Rollerbrake integrated with an internal-gear hub – and unlike a rim brake, immune to wet weather.

In my opinion, a three-speed with the top gear in the 70- to 80-inch range (5.6 to 6.4 meters development) is the minimum requirement for smart performance in urban cycling. I think that the preferred gearing in most urban areas has 5 to 8 speeds.

A very hilly city such as San Francisco demands a wider range than a moderately-priced hub gear can offer. Hybrid gearing or an all-derailer system is less expensive than these hubs, though more trouble to maintain.

Weight also figures into the choice of a hub. Light weight matters much more when a bicycle is being carried than when it is being ridden, and is especially important in folding bicycles, which are more often carried.

With its three-speed and five-speed hubs in aluminum alloy shells, Sturmey-Archer still maintains the tradition of weight optimization that it established in the mid-twentieth century. Though SRAM’s five-speed and seven-speed hubs were much like Sturmey-Archer hubs internally, most were sold with heavy steel shells. Shimano stands somewhere in between. None of the hubs with more than seven speeds is very light, .

My own bicycles have from one to 30 speeds, but for urban cycling, I am still riding an old Sturmey-Archer 5-speed hub. Feeling the need for a lower gear range to pull a trailer up the hill to my home, I have built up a wheel with the SRAM 7-speed model that includes a drum brake, and another with a Shimano 8-speed. I'll be trying both.. The SRAM has an aluminum alloy shell, and even with the brake, weighs only very slightly more than the brakeless version with a steel shell. The Shimano has a Rollerbrake, but I'm planning to remove this and use a rim brake instead, because the Rollerbrake drags when not in use.

Siehe auch

Werbung:

Quelle

Dieser Artikel basiert auf dem Artikel Internal Gear Hub Theory von der Website Sheldon Browns. Originalautor des Artikels ist John Allen.