Cookie Consent by Free Privacy Policy Generator

Anonym

Das 1x1 der Trommelbremsen: Unterschied zwischen den Versionen

Aus WikiPedalia
(→‎Montage und Wartung: Bilder ergänzt)
Zeile 97: Zeile 97:
It goes without saying that the cable to any front hub brake on a suspension fork must be run in housing, but the cable to a front hub brake with a rigid fork must also be run in housing, because flexing of the fork during braking can tighten an open cable and lock the brake.
It goes without saying that the cable to any front hub brake on a suspension fork must be run in housing, but the cable to a front hub brake with a rigid fork must also be run in housing, because flexing of the fork during braking can tighten an open cable and lock the brake.


Someone didn't read our advice on cable routing.
<center>
DO NOT RUN AN OPEN CABLE TO A FRONT HUB BRAKE!
''Hier hat jemand den Hinweis zur Zugführung nicht beachtet.<br>
The rear cable is a bit long too, but that isn't a killer.
'''Bitte niemals einen offen liegenden Zug zur Vorderradbremse verlegen!'''<br>
 
Der Zug zur hinteren Bremse ais auch etwas lang geraten. Das bringt aber niemanden um.''
Open drum-brake cable. Do not do this!
[[Datei:Drumcable1.jpg|center|Offen liegender Trommelbremszug. Bitte nicht machen!]]
</center>


Older brake-shoe linings generally contain asbestos, which causes lung cancer. Avoid breathing the dust from these linings.
Older brake-shoe linings generally contain asbestos, which causes lung cancer. Avoid breathing the dust from these linings.
15.322

Bearbeitungen