Cookie Consent by Free Privacy Policy Generator

Anonym

Lenkerband wickeln: Unterschied zwischen den Versionen

Aus WikiPedalia
(→‎Hebel und Züge vorbereiten: Bilder hinzugefügt)
Zeile 66: Zeile 66:


==Hebel und Züge vorbereiten==
==Hebel und Züge vorbereiten==
 
Zuallererst sollte man sicherstellen, dass man die richtigen Brems- und Schalthabel hat, diese an der gewünschten Position verbaut sind und richtig funktionieren. Wenn das lenkerband noch nicht am Lenker ist, ist das ein guter Zeitpunkt, die Hauben mit Waschlösung, Wasser und einer Bürste zu reinigen. Gummi kann aufuqllen, wenn es sich mit Petroleum-basierten Lösungsmitteln vollsaugt.
First things first: make sure that the brake and shift levers are the correct ones, installed where you want them and working correctly. When the tape is off the handlebar is a good time to clean the brake-lever hoods. Use detergent, water: and a scrub brush: rubber can expand as it soaks up petroleum-based solvents.


A test ride without tape on the handlebars is a luxury available to the home mechanic; a shop mechanic must usually rely on experience. Wear gloves with padded palms for the test ride.
A test ride without tape on the handlebars is a luxury available to the home mechanic; a shop mechanic must usually rely on experience. Wear gloves with padded palms for the test ride.
Zeile 78: Zeile 77:
Some folks cut multiple short strips of electrician's tape to secure the cables, but we prefer to just wind a continuous open helix of tape along the bar. This saves time and is more secure. You can unwind and rewind the tape if you decide to reposition the brake levers.
Some folks cut multiple short strips of electrician's tape to secure the cables, but we prefer to just wind a continuous open helix of tape along the bar. This saves time and is more secure. You can unwind and rewind the tape if you decide to reposition the brake levers.
<center>
<center>
''Lenker für das Wickeln vorbereitet, Bremszüge sinbd mit Isoband gesichert''
''Lenker für das Wickeln vorbereitet, Bremszüge sind mit Isoband gesichert''
[[Datei:Bare-barssm.IMG 0591.JPG|center|Lenker mit Klebebändern, die die Bremszüge sichern, vorbereitet]]
[[Datei:Bare-barssm.IMG 0591.JPG|center|Lenker mit Klebebändern, die die Bremszüge sichern, vorbereitet]]
</center>
</center>
15.322

Bearbeitungen