Cookie Consent by Free Privacy Policy Generator

Anonym

Lenkerband wickeln: Unterschied zwischen den Versionen

Aus WikiPedalia
(→‎Richtungsfrage: übersetzt)
Zeile 51: Zeile 51:


==Richtungsfrage==
==Richtungsfrage==
Im Allgemeinen wird Lenkerband von den Enden des Lenkers her in Richtung Mitte gewickelt. Der Hauptgrund hierfür ist die Richtung der Überlappung insbesondere in den Rundungen (der obere nach vorne zeigende Boden des Lenkers). Wenn man an den Enden beginnt, üppberlappen sich die einzelnen Schichten wie Dachschindeln, bei der die obere Kante des Bands von der nächsten Windung überdeckt wird.


Generally, handlebar tape should be wound on starting at the ends of the bars and winding toward the middle. The reason for this is the direction of the overlap, specifically in the area of the "corners" (the upper, forward bend of the handlebar.) If you start at the ends of the bar, the layers overlap one another like the shingles of a roof, with the upper edge of the tape protected by the next winding up from it.
Wenn man von der Mitte her in Richtung Enden wickelt sind diese oberen Kanten freiliegend und der Druck der Hände kann diese Kanten abwärts vom Lenker weg aufrollen.


If you start from the middle and work toward the ends, the upper edges of the tape are exposed, and hand pressure will tend to roll them down and away from the handlebar.
Die einzige Ausnahme ist das dünne Plastikband, das üblicherweise immun gegen diese Art von Versagen ist, wenn es mit genügend Spannung gewickelt wurde.


The exception to this is thin plastic tape, which is usually immune to this sort of failure, if installed with sufficient tension.
Unabhängig davon, ob man von den Enden oder von der Mitte her startet, sollte man auf beiden Seiten in die gleiche Richtung wickeln. [[Sheldon Brown]] begann im Allgemeinen von der Unterseite des Lenkers nach außen weisend. Man kann auch andersherum anfangen. Man sollte jedoch darauf achten, dass man auf beiden Seiten das gleiche Muster anwendet, damit das Ergebnis am Ende professionell aussieht.


Whether you start from the middle or from the ends, make sure to start in the same way on both sides. Sheldon generally started from the underside of the bar with the tape feeding outwards. You can do it the other way too, but make sure you follow the same pattern on both sides if you want the job to look professional.
Über die Wickelrichtung können mnache Leute wie über die richtige Kettenpflege endlos diskutieren, weil es keine perfekte Lösung gibt - Lenkerband wird irgendwann ausfransen oder sich lösen. [[John Allen]] hat sich zum Thema noch einige zusätzliche - vielleicht zuviele - Gedanken gemacht. Es ist eine ziemliche Nerddiskussion und folgt am Ende dieses Artikels.
 
People could debate the winding direction endlessly, like chain lubrication, because there is no perfect solution -- tape will eventually fray or loosen, either way. I (John Allen) have given the issue of winding direction more thought-- maybe too much, and it is a nerdy discussion so I have placed it at the end of this article.


==Zugkraft==
==Zugkraft==
15.321

Bearbeitungen