SRAM i-Motion 9 Nabe: Unterschied zwischen den Versionen

SRAM i-Motion 9 Nabe (Quelltext anzeigen)

485 Bytes hinzugefügt , 4. September 2019

Siehe auch erweitert...

15.340

Bearbeitungen

@@ Zeile 80: / Zeile 80: @@
 *    a single sun gear, locked to the axle, which engages the planet gears in the previous step.
-These parts are shown in steps 25 through 29 of my disassembly sequence.
+Diese Bauteile sieht man in den Schritten 25 bis 29 in der [https://www.sheldonbrown.com/Disassembly%20of%20SRAM%20i-9.pdf Dokumentation von John Allen zur Demontage der i-Motion 9 Nabe (PDF/englisch)].
 Power is applied at the right side of the hub, as usual, and taken off at the left side. Thanks to the two ring gears, power may go from right to left inside the hub, then to the right, and then back again to the left. The two cages and the ring gear may be engaged or disengaged at either side of the hub. In this way, the same gear train can achieve both increase and decrease ratios, including ratios using both planetary systems.
@@ Zeile 93: / Zeile 93: @@
 * [https://www.sheldonbrown.com/gear-calc.html Online gear calculator for internal-gear hubs (englisch)]
 * [[Sachs und SRAM Nabenschaltungen]]
+* [https://www.sheldonbrown.com/Disassembly%20of%20SRAM%20i-9.pdf Dokumentation von John Allen zur Demontage der i-Motion 9 Nabe (PDF/englisch)]
+* [https://cdn.sram.com/sites/default/files/techdocs/iMOTION_9_Ins_D_5_06.pdf SRAM i-Motion 9 Betriebshandbuch (PDF/Deutsch)]
+* [https://www.servicearchive.sram.com/service/sram/259,261 Serviceseite von SRAM]
 ==Quelle==