SunTour Fahrradbauteile: Unterschied zwischen den Versionen

SunTour Fahrradbauteile (Quelltext anzeigen)

39 Bytes hinzugefügt , 22. Oktober 2019

15.340

Bearbeitungen

@@ Zeile 90: / Zeile 90: @@
 ===Winner Pro, Alpha und die zweite Winner Serie===
-<center>''von Brunce Dance''</center>
+<center>''von Bruce Dance''</center>
+Als die "Winner Pro" und "Alpha" Serien auf den markt gebracht wurden, wurde verwirrenderweise auch eine dazwischen liegende Serie namens "Winner" auf den markt gebracht. So gab es dann zwei SunTour Freiläufe der Serie "Winner", die zehn Jahre Abstand hatten.
-When the 'Winner Pro' and 'Alpha' series were launched they also (confusingly) launched a middle model which they called the 'Winner'. So there are two SunTour freewheels called the 'Winner', separated by about ten years.
 The 'Winner Pro'  has labyrinth seals and post-hardening-ground bearing races. The 1985 (newer) 'Winner' does not. They are otherwise identical, apart from the color of the lock-ring. The seals do not deter the ingress of the British weather completely, and must be regarded as as mixed blessing; once water gets inside, the seal ridges do seem to help water stay inside the freewheel body, where it would surely come out in use otherwise. [See Jobst Brandt's comments on sealed bearings -- John Allen] The only other benefit of the seals is that they make it less likely that a ball will be dislodged when rebuilding a freewheel body.