Die Sturmey-Archer Sprinter Fünf-Gang-Nabe: Unterschied zwischen den Versionen

When service problems occur which cannot be corrected by attention to external maintenance, a close inspection of the working parts inside the hub will be necessary. Refer to the fault diagnosis chart before commencing disassembly which can be done without the use of special tools. Note: The right hand end of the axle is where the sprocket and indicator are fitted. The axle should be clamped across the flats taking care not to damage the threads.

*    Remove the indicator rod, indicator protectors or gear selector guide (if fitted), axle nuts and spacing washers from both ends of the axle.