Gute und schlechte Schnellspanner: Unterschied zwischen den Versionen

One type, invented by Schwinn engineer Frank Brilando, uses clips attached to the hub axle inboard of the locknuts, and which hook over pegs at the inside of the fork blades. This device is quick to operate, and holds the wheel in place even if the quick-release skewer breaks and falls out. A modified hub and fork are necessary. I've only ever seen this device on Schwinn bicycles. The drawing below is from Brilando's patent.

Here's a rather rusty but still serviceable Schwinn clip found in the wild.

===Ausfallende-Haken===