Bürokraten, editor, Administratoren
15.322
Bearbeitungen
(→Siehe auch: ergänzt) |
(→Schrarubritzel mit mehr als 21 Zähnen: Bilder hinzugefügt) |
||
Zeile 184: | Zeile 184: | ||
The New Winner body takes only two splined sprockets, and threaded sprockets were sold only in sizes up to 21 teeth, requiring a big jump in size between sprockets if the splined sprockets are large. An aftermarket adapter to allow a splined sprocket in the third position was available once -- no longer -- but there is a workaround. The 15-tooth threaded sprocket's flange fits neatly into the opening in a splined sprocket with flat-top splines, and can be tack-welded onto the inside face of the larger sprocket (the side where the teeth are shorter), also serving as a spacer. The welds must not extend higher than the face of the smaller sprocket. Grind the welds down if necessary. | The New Winner body takes only two splined sprockets, and threaded sprockets were sold only in sizes up to 21 teeth, requiring a big jump in size between sprockets if the splined sprockets are large. An aftermarket adapter to allow a splined sprocket in the third position was available once -- no longer -- but there is a workaround. The 15-tooth threaded sprocket's flange fits neatly into the opening in a splined sprocket with flat-top splines, and can be tack-welded onto the inside face of the larger sprocket (the side where the teeth are shorter), also serving as a spacer. The welds must not extend higher than the face of the smaller sprocket. Grind the welds down if necessary. | ||
<gallery mode=packed caption="Keilverzazntes Ritzel zu Schraubritzel umgebaut"> | |||
Datei:Sprocket-DSCF0010small.JPG|Außenseite des Ritzels | |||
Datei:Sprocket-DSCF0011small.JPG|Innenseite des Ritzels | |||
</gallery> | |||
===Angeschraubtes oder gewölbtes Ritzel innen=== | ===Angeschraubtes oder gewölbtes Ritzel innen=== |