Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Felge und Nabe messen, um Speichenlängen zu berechnen: Unterschied zwischen den Versionen
Felge und Nabe messen, um Speichenlängen zu berechnen (Quelltext anzeigen)
Version vom 21. Februar 2022, 12:48 Uhr
, 21. Februar 2022→Flanschabstand von der Mittellinie: Bilder hinzugefügt
(→Der Speichenlochkreis und der Speichenlochdurchmesser: png statt gif) |
(→Flanschabstand von der Mittellinie: Bilder hinzugefügt) |
||
| Zeile 187: | Zeile 187: | ||
Both ends of the hub are measured. First, let's measure from the right end. The right flange is 50mm to the left of the right locknut, and the left flange is at 100mm to the left of the right locknut. | Both ends of the hub are measured. First, let's measure from the right end. The right flange is 50mm to the left of the right locknut, and the left flange is at 100mm to the left of the right locknut. | ||
[[Datei:Flangespace-sm.jpg|center|Flanschabstand auf der Antriebsseite messen]] | |||
Next, turning the hub over and measuring the other end, the left flange is 35mm from the left locknut. | Next, turning the hub over and measuring the other end, the left flange is 35mm from the left locknut. | ||
[[Datei:Flangespace-left-sm.jpg|center|Flanschabstand auf der Nicht-Antriebsseite messen]] | |||
Calculating now, the overlocknut distance is 135mm, as in the manufacturer's specification in the drawing above. Half that is 67.5mm. The right flange, at 50mm from the right locknut, is 67.5-50mm or 17.5mm from the centerline of the hub and the left flange at 35mm from the left locknut is 67.5-35mm or 32.5mm from the centerline. These measurements are not an exact match for the manufacturer's specifications, but are close enough for all practical purposes. | Calculating now, the overlocknut distance is 135mm, as in the manufacturer's specification in the drawing above. Half that is 67.5mm. The right flange, at 50mm from the right locknut, is 67.5-50mm or 17.5mm from the centerline of the hub and the left flange at 35mm from the left locknut is 67.5-35mm or 32.5mm from the centerline. These measurements are not an exact match for the manufacturer's specifications, but are close enough for all practical purposes. | ||