Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Felge und Nabe messen, um Speichenlängen zu berechnen: Unterschied zwischen den Versionen
Felge und Nabe messen, um Speichenlängen zu berechnen (Quelltext anzeigen)
Version vom 24. Februar 2022, 11:24 Uhr
, 24. Februar 2022→Falls Speichen zu kurz sind oder scheinen: Bild hinzugefügt
(→Fehler und Ihre Effekte: weiter...) |
(→Falls Speichen zu kurz sind oder scheinen: Bild hinzugefügt) |
||
| Zeile 271: | Zeile 271: | ||
===Falls Speichen zu kurz sind oder scheinen=== | ===Falls Speichen zu kurz sind oder scheinen=== | ||
[[Datei:Hammer spoke fadedsm.jpg|right|Zurechtbiegen einer Speiche am Nabenflansch]] | |||
* | * Spokes at the outside of the hub flanges may appear too short when lacing the wheel if they bow outward. You may need to tap on spokes lightly with the flat face of a hammer or mallet just outside the hub flange to straighten them so they reach the spoke nipples. | ||
* A spoke which is too short, or has long threads, will leave threads visible outside the nipple. | * A spoke which is too short, or has long threads, will leave threads visible outside the nipple. | ||
* If the rim covers much of the nipples' length, long nipples may be required so a spoke wrench can reach the nipples' wrench flats. Longer threads prevent a spoke with short threads from screwing in all the way, so check for compatibility. | * If the rim covers much of the nipples' length, long nipples may be required so a spoke wrench can reach the nipples' wrench flats. Longer threads prevent a spoke with short threads from screwing in all the way, so check for compatibility. | ||