Bürokraten, editor, Administratoren
15.323
Bearbeitungen
(→Was wird gemessen?: Bild hinzu) |
(→Was wird gemessen?: Bild hinzu) |
||
Zeile 26: | Zeile 26: | ||
The two known sides (A and B) are the radius (half diameter) of the circle of spoke holes in the hub flange, and the radius of the circle of spoke holes of the rim. The angle θ depends on the number of spoke flange spacing from centerline holes and the spoking pattern. | The two known sides (A and B) are the radius (half diameter) of the circle of spoke holes in the hub flange, and the radius of the circle of spoke holes of the rim. The angle θ depends on the number of spoke flange spacing from centerline holes and the spoking pattern. | ||
[[Datei:S7-x-section-linessm.png|right|Zweiter Schritt für die Berechnung der Speichenlänge unter Berücksichtigung der Speichenneigung gegenüber der Mittellinie]] | |||
The first step creates a virtual measuring point directly below the spoke holes in the rim. There's nothing to measure directly there, and that's why a second step is needed. | The first step creates a virtual measuring point directly below the spoke holes in the rim. There's nothing to measure directly there, and that's why a second step is needed. | ||