Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Gute und schlechte Schnellspanner: Unterschied zwischen den Versionen
Gute und schlechte Schnellspanner (Quelltext anzeigen)
Version vom 14. April 2016, 06:59 Uhr
, 14. April 2016→Offener Exzenter: Bild
K (→Geschlossener Exzenter: Bild) |
K (→Offener Exzenter: Bild) |
||
| Zeile 110: | Zeile 110: | ||
===Offener Exzenter=== | ===Offener Exzenter=== | ||
[[Bild:Skewer-external.jpg|right|Schnellspanner mit offenem Exzenter]]Sometime in the '80s, a variant type of skewer was introduced, one that is less expensive to manufacture, and is sometimes a bit lighter. This type uses a split external cam that straddles the end of the skewer. External-cam skewers use a curved plastic washer between the cam and the toothed metal washer that presses against the dropout. | |||
Sometime in the '80s, a variant type of skewer was introduced, one that is less expensive to manufacture, and is sometimes a bit lighter. This type uses a split external cam that straddles the end of the skewer. External-cam skewers use a curved plastic washer between the cam and the toothed metal washer that presses against the dropout. | |||
This type was originally marketed as an "upgrade" because it could be made a little bit lighter. | This type was originally marketed as an "upgrade" because it could be made a little bit lighter. | ||
| Zeile 127: | Zeile 125: | ||
The exposed-cam skewers are generally OK for vertical dropouts in back, and for forks with "lawyer lips", but should not be relied on with horizontal dropouts or plain forks. | The exposed-cam skewers are generally OK for vertical dropouts in back, and for forks with "lawyer lips", but should not be relied on with horizontal dropouts or plain forks. | ||
===Design der Hutmutter=== | ===Design der Hutmutter=== | ||