Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Kurbeln ohne Splintbefestigung: Unterschied zwischen den Versionen
Kurbeln ohne Splintbefestigung (Quelltext anzeigen)
Version vom 24. September 2020, 05:49 Uhr
, 24. September 2020→Wo man keinen Kurbelabzieher benötigt: Bild hinzu
(→Der universelle Kurbelabzieher von Park Tool: weiter...) |
(→Wo man keinen Kurbelabzieher benötigt: Bild hinzu) |
||
| Zeile 121: | Zeile 121: | ||
presses it against the dustcap. | presses it against the dustcap. | ||
[[Datei:ExtractorlessIMG 5227sm.JPG|center|System ohne notwendigen Kurbelabzieher]] | |||
The steel dustcap functions as the "nut" in a standard crank puller, and when you're removing the crank, the fixing bolt functions as the crank puller's "bolt." As you loosen the fixing bolt, the head of the bolt pushes against the inside of the dustcap, pulling the crank from the spindle. | The steel dustcap functions as the "nut" in a standard crank puller, and when you're removing the crank, the fixing bolt functions as the crank puller's "bolt." As you loosen the fixing bolt, the head of the bolt pushes against the inside of the dustcap, pulling the crank from the spindle. | ||
| Zeile 128: | Zeile 128: | ||
Crank bolts which have an Allen head but are not one-key release generally have a plastic dustcap which is attached to the bolt instead of the crank. Any self-extracting system has a dustcap with slots (as shown above) or holes for a pin spanner so the dustcap can be threaded into the crank. | Crank bolts which have an Allen head but are not one-key release generally have a plastic dustcap which is attached to the bolt instead of the crank. Any self-extracting system has a dustcap with slots (as shown above) or holes for a pin spanner so the dustcap can be threaded into the crank. | ||
==Letzte Rettung== | ==Letzte Rettung== | ||