Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Remontage von Sturmey-Archer Naben: Unterschied zwischen den Versionen
Remontage von Sturmey-Archer Naben (Quelltext anzeigen)
Version vom 5. Oktober 2018, 11:23 Uhr
, 5. Oktober 2018→Sperrklinken und Federn im Planetenkäfig der AW, AB, AG, AM, AC und FC Nabenschaltungsnaben ersetzen: Bild hinzu
(→Mitnehmer und Ritzel: Bilder hinzugefügt) |
|||
| Zeile 20: | Zeile 20: | ||
==Sperrklinken und Federn im Planetenkäfig der AW, AB, AG, AM, AC und FC Nabenschaltungsnaben ersetzen== | ==Sperrklinken und Federn im Planetenkäfig der AW, AB, AG, AM, AC und FC Nabenschaltungsnaben ersetzen== | ||
[[Datei:Reass1.png|left|Feder mit Pinzette einsetzen]]Hold the planet cage in the left-hand, with flanges (in which the pawls fit) away from the body. Place a pawl between the flanges, with the flat top surface pointing towards the right, and insert a pawl pin through the outside flange and half-way through the pawl. | |||
With tweezers or thin-nosed pliers* grip the bent leg of the pawl spring in the right hand and pass the spring along the side of the pawl until the loop of the spring is in line with the hole through the pawl and both legs of the spring are between the pawl and the planet cage. The pawl pin can now be pushed right in. It will enter the spring and keep it in position, and the bent leg of the pring will press against the pawl and so keep it projecting towards the right. If the job has been done correctly, the pawls will be pointing towards the right, with the flat surface uppermost, when the planet cage is held so that the dogs or pinion pins are facing the body. | With tweezers or thin-nosed pliers* grip the bent leg of the pawl spring in the right hand and pass the spring along the side of the pawl until the loop of the spring is in line with the hole through the pawl and both legs of the spring are between the pawl and the planet cage. The pawl pin can now be pushed right in. It will enter the spring and keep it in position, and the bent leg of the pring will press against the pawl and so keep it projecting towards the right. If the job has been done correctly, the pawls will be pointing towards the right, with the flat surface uppermost, when the planet cage is held so that the dogs or pinion pins are facing the body. | ||