Shimano Alfine Elf-Gang-Naben: Unterschied zwischen den Versionen

Shimano Alfine Elf-Gang-Naben (Quelltext anzeigen)

Version vom 16. Dezember 2019, 15:04 Uhr

524 Bytes hinzugefügt , 16. Dezember 2019

→‎Übersetzungssbandbreite: Tabellen

Bikegeissel

Bürokraten, editor, Administratoren

15.322

Bearbeitungen

@@ Zeile 25: / Zeile 25: @@
 The overall range of the 11-speed hub is 408%. The steps between gears are very even except for the lowest step, which is about twice as large as the others. That is not necessarily a bad thing, because narrow ratios in low gears can result in too-frequent shifts, especially while accelerating
-Ratio 	0.527 	0.681 	0.770 	0.878 	0.995 	1.134 	1.292 	1.462 	1.667 	1.888 	2.153
+{| class="wikitable"
-Step 	29.2% 	13.1% 	14.0% 	13.3% 	14.0% 	13.9% 	13.2% 	14.0% 	13.3% 	14.0%
+|-
+|colspan=2|'''Übersetzung'''
+|colspan=2| 0,527
+|colspan=2|0,681
+|colspan=2|0,770
+|colspan=2|0,878
+|colspan=2|0,995
+|colspan=2|1,134
+|colspan=2|1,292
+|colspan=2|1,462
+|colspan=2|1,667
+|colspan=2|1,888
+|colspan=2|1,153
+|-
+|colspan=3|'''Abstufung'''
+|colspan=2|29,2%
+|colspan=2|13,1%
+|colspan=2|14,0%
+|colspan=2|13,3%
+|colspan=2|14,0%
+|colspan=2|13,9%
+|colspan=2|13,2%
+|colspan=2|14,0%
+|colspan=2|13,3%
+|colspan=2|14,0%
+|}
 By way of comparison, the overall range of the Shimano 8-speed hubs is 307%, and the steps are uneven:
-Ratio 	0.527 	0.644 	0.748 	0.851 	1.000 	1.223 	1.419 	1.615
-Step 	22.3% 	16.0% 	13.9% 	17.5% 	22.3% 	16.0% 	13.9%
+{| class="wikitable"
+|-
+|colspan=2|'''Übersetzung'''
+|colspan=2| 0,527
+|colspan=2|0,644
+|colspan=2|0,748
+|colspan=2|0,851
+|colspan=2|1,000
+|colspan=2|1,223
+|colspan=2|1,419
+|colspan=2|1,615
+|-
+|colspan=3|'''Abstufung'''
+|colspan=2|22,3%
+|colspan=2|16,0%
+|colspan=2|13,9%
+|colspan=2|17,5%
+|colspan=2|22,3%
+|colspan=2|16,0%
+|colspan=2|13,9%
+|}
 Click here for an On-line Gear Calculator for Internally-Geared Hubs
 The Alfine 11-speed hub uses 3-lug sprockets common to many brands, 16 teeth and up. The sprocket supplied with this hub has a chain guide plate attached, which will help keep a loose chain from coming off and potentially damaging the shifting parts. This sprocket works with any derailer chain except for the narrowest (10-speed and up). Wider chain may also be used. Choose the sprocket and chainwheel to set 9th gear of the hub for level-ground riding (typically, around 75 gear inches, 6 meters development).
 ==Funktionsweise==