Wartung von Sturmey-Archer Vier-, Fünf- und Sieben-Gang-Naben: Unterschied zwischen den Versionen
Aus WikiPedalia
(→1939-1990: abwärts) |
(→Über die FW und S5: abwärts) |
||
Zeile 331: | Zeile 331: | ||
S5/2 II 1988 Axle modification. Indicator spindles changed. Technical information | S5/2 II 1988 Axle modification. Indicator spindles changed. Technical information | ||
==Über die FW und S5== | ===Über die FW und S5=== | ||
The FW four-speed hub used the wide-range sun-gear setting to provide only a "super low" gear. The shift from normal "low" to "super low" ("2" to "1") required a very strong pull on the gear cable to overcome the spring that controlled the sun gears. This hub used a two-part indicator spindle whose adjustment is described here. | The FW four-speed hub used the wide-range sun-gear setting to provide only a "super low" gear. The shift from normal "low" to "super low" ("2" to "1") required a very strong pull on the gear cable to overcome the spring that controlled the sun gears. This hub used a two-part indicator spindle whose adjustment is described here. |