Sturmey-Archer Naben

Dieser Artikel wrid gerade übersetzt

Da dieaser Artikel gerade übersetzt wird, bitte etwas Geduld aufbringen bis nach Fertigstellung dieser Hinweis verschwindet --Bikegeissel 10:04, 11. Okt. 2013 (UTC)

Old English Almost all English 3-speeds have Sturmey-Archer rear hubs, and there have been many different models since the company started in 1902. Sturmey-Archer was a division of Raleigh Industries until autumn, 2000, when the parent company ran into financial difficulties. Sturmey-Archer (U.K.) was rendered homeless by various corporate maneuvers. For a while it appeared that it would disappear entirely into bankruptcy. The land the factory stood on was sold, and Sturmey-Archer was nearly liquidated by a corporate raider. Fortunately, a Taiwanese company called SunRace came to the rescue, and bought the company assets more or less intact. The machinery and stock were moved to Taiwan. SunRace resumed production of Sturmey-Archer hubs -- some pre-existing models, many new ones.

Sturmey-Archer quality had been on a downward slide since the early 1960s, as the company's engineering efforts shifted from trying to make a better product, as they had been through the first half century, to finding ways to make an acceptable product cheaper. Sturmey-Archer's quality peaked probably in the late '50s.

SunRace spent a great deal of money moving the machinery from England to Taiwan, but when it arrived, it turned out that most of the machinery was worn-out junk, no longer capable of manufacturing parts to the degree of precision appropriate to the 21st century.

I heard an interesting anecdote from a Sturmey-Archer veteran employee, now with SunRace/Sturmey-Archer: Back in the day, sometimes a batch of internal parts would be just a bit out of tolerance, maybe a bit too small, or a bit too large, whatever. The production people would take a sample to the engineering department, where a grey-haired engineer would check it out and often say "Well, it is a bit out of spec, but not really enough to cause failure, so let's let it go."

SunRace didn't have those engineers who had grown up with Sturmey-Archer in their blood, so when they found a batch of out-of-spec parts, they would say "That's out of spec! Melt it down, and make new ones, and do it right this time!"

In any case, the quality of Taiwanese production from SunRace/Sturmey-Archer so far has been excellent, generally better than the quality of later English production. Sturmey-Archer's selection of multi-speed hubs is much wider than that of the other manufacturers. Sturmey-Archer hubs tend to be lighter than the competitors'. SunRace has also introduced many new models, including an 8-speed internal-gear hub, a fixed-gear three-speed and an updated version of the Dynohub generator. Many Sturmey-Archer hubs -- even the 8-speed -- can fit the narrow dropout spacings of older bicycles. .

Some folks don't believe that the Taiwanese can make stuff as well as the British did, but there's no factual basis for that belief, and in many cases this attitude may be traced to racism.

Aktuelle Sturmey-Archer Modelle und die meisten anderen seit den 1930er Jahren

Cells with pink backgrounds identify current models as of 2010.

Quick Reference
2-speeds	3-speeds	4-speeds
5-speeds 1967-2000	5-speeds 2000-	7-speeds
8-speeds	1-speed brake hubs	Front hubs

Individual models Links to individual models are mostly for older models.
AB	AB/C	AC	AG	AM	AR	ASC	AT3	AW	AWC	BF	BFC
BF/C	BFT	BR	BRC	BRT	FB	FC	FG	FM	FW	GH6	K
KB	KBC	KS	KSW	KT	KTC	S5	S5-2	S3C	SAB3	SBF	SBR
Spr.5	Spr.7	ST	SW	T	TB	TBC	TBF	TBFC	TCW	TF	VT

Naben mit Nabenschaltung

Zwei Gänge

Model	Speeds	Range	Gears(%)	Features
B2C	2	Wide	138 100	2-speed kickback hub, coaster brake, steel shell. Also see coaster-brake page.
S2C	2	Wide	138 100	2-speed kickback hub, coaster brake, aluminum shell. Also see coaster-brake page.
S2	2	Wide	138 100	2-speed kickback hub, no brake, aluminum shell.
S2 (1960)	2	Wide	100 71.4	Note, same model number as new S2 but different ratios. 1960s model with kickback shifting
T	2	Medium	100 75	A rare 1930s model, made for club bicycles and tandems. If you have a fast connection, you can see sales brochures for this model.
TB	2	Wide	100 75	A rare 1930s two-speed hub with cable/rod-operated drum brake. Similar to TBC If you have a fast connection, you can see sales brochures for this model.
TBC	2	Wide	100 75	A rare 1930s two-speed hub with cable-operated drum brake. Similar to TB If you have a fast connection, you can see sales brochures for this model.
TBF	2	Wide	100 75	A rare 1930s fixed gear two-speed hub with cable/rod-operated drum brake. Similar to TBFC If you have a fast connection, you can see sales brochures for this model.
TBFC	2	Wide	100 75	A rare 1930s fixed gear two-speed hub with cable-operated drum brake. Similar to TBF If you have a fast connection, you can see sales brochures for this model.
TC	2	Close	100 86.54	A rare 1930s model, made for club bicycles. See: sa-1938f2.jpeg (176k) If you have a fast connection, you can see sales brochures for this model.
TF	2	Medium	100 75	A rare 1930s fixed gear model, made for club bicycles and tandems. The fixed-gear version of the T Sturmey-Archer TF If you have a fast connection, you can see sales brochures for this model.

Drei Gänge

Vier Gänge

Fünf Gänge (1967-2000)

Fünf Gänge (ab 2000)

Sieben Gänge

Acht Gänge

Ein Gang Bremsnaben

Vorderradnaben

BF	Formerly, drum brake for rod operation (similar to BFC) Now this name is used for a 90mm cable-operated drum brake (current model). If you have a fast connection, you can see sales brochures for this model.
BFC	Drum brake for cable operation (similar to BF). If you have a fast connection, you can see sales brochures for this model.
BF/C	90 mm drum brake for cable operation (current model is called the BF but refers to this one's technical info.)
BFT	Tandem drum brake for cable operation (similar to BFC) If you have a fast connection, you can see sales brochures for this model.
HBT	Front track hub to match the S3X fixed-gear hub. Available in several colors.
GH6	Front hub with built-in Dynohub generator.
SBF	70 mm "Steelite" drum brake for cable operation (current model)
VT	70 mm "Elite" drum brake for cable operation
X-FD	Front hub with 70mm drum brake.
X-FDD	Front hub with 70mm drum brake and new-model Dynohub generator.
XL-FD	Front hub with 90mm drum brake
XL-FDD	Front hub with 90mm drum brake and new-model Dynohub generator.
X-SD	Front single-side (tadpole tricycle front) hub with 70mm drum brake.
XL-SD	Front single-side (tadpole tricycle front) hub with 90mm drum brake.

Siehe auch

Quelle

Dieser Artikel basiert auf dem Artikel Sturmey-Archer Bicycle Hubs von der Website Sheldon Browns. Originalautor des Artikels ist Sheldon Brown.