Über den Einsatz von SunTour Perfect, Pro Compe und New Winner Schraubkranzfreiläufen: Unterschied zwischen den Versionen
Aus WikiPedalia
(→Ritzel: Tabelle teilübersetzt) |
|||
Zeile 272: | Zeile 272: | ||
==Individualisierungsmöglichkeiten== | ==Individualisierungsmöglichkeiten== | ||
=== | ===Schrarubritzel mit mehr als 21 Zähnen=== | ||
The New Winner body takes only two splined sprockets, and threaded sprockets were sold only in sizes up to 21 teeth, requiring a big jump in size between sprockets if the splined sprockets are large. An aftermarket adapter to allow a splined sprocket in the third position was available once -- no longer -- but there is a workaround. The 15-tooth threaded sprocket's flange fits neatly into the opening in a splined sprocket with flat-top splines, and can be tack-welded onto the inside face of the larger sprocket (the side where the teeth are shorter), also serving as a spacer. The welds must not extend higher than the face of the smaller sprocket. Grind the welds down if necessary. | The New Winner body takes only two splined sprockets, and threaded sprockets were sold only in sizes up to 21 teeth, requiring a big jump in size between sprockets if the splined sprockets are large. An aftermarket adapter to allow a splined sprocket in the third position was available once -- no longer -- but there is a workaround. The 15-tooth threaded sprocket's flange fits neatly into the opening in a splined sprocket with flat-top splines, and can be tack-welded onto the inside face of the larger sprocket (the side where the teeth are shorter), also serving as a spacer. The welds must not extend higher than the face of the smaller sprocket. Grind the welds down if necessary. |