Bürokraten, editor, Administratoren
15.323
Bearbeitungen
Auswahl und Montage eines Patronenlagers: Unterschied zwischen den Versionen
Auswahl und Montage eines Patronenlagers (Quelltext anzeigen)
Version vom 8. April 2015, 07:24 Uhr
, 8. April 2015siehe auch ergänzt
(typos und übersetzung) |
K (siehe auch ergänzt) |
||
| Zeile 35: | Zeile 35: | ||
|[[Bild:Mountringssm.jpeg]] | |[[Bild:Mountringssm.jpeg]] | ||
|} | |} | ||
;siehe auch | |||
* [[Innenlagermaße und -austauschbarkeit (Tabelle)]] | |||
See Sheldon's bottom-bracket crib sheet for information on dimensions and see the selection at Harris Cyclery for details of axle lengths. Chainline can further be adjusted during installation by repositioning the mounting rings. The Phil Wood axle is shoulderless -- press-fit into the bearing cartridges -- and so its offset can be adjusted when the bearings are replaced. | See Sheldon's bottom-bracket crib sheet for information on dimensions and see the selection at Harris Cyclery for details of axle lengths. Chainline can further be adjusted during installation by repositioning the mounting rings. The Phil Wood axle is shoulderless -- press-fit into the bearing cartridges -- and so its offset can be adjusted when the bearings are replaced. | ||