Shimano Alfine Elf-Gang-Naben: Unterschied zwischen den Versionen

Shimano Alfine Elf-Gang-Naben (Quelltext anzeigen)

Version vom 19. Dezember 2019, 08:12 Uhr

352 Bytes hinzugefügt , 19. Dezember 2019

→‎Konfiguration der Gänge: weiter

Bikegeissel

Bürokraten, editor, Administratoren

15.322

Bearbeitungen

@@ Zeile 191: / Zeile 191: @@
 | align="center"|RG1
 |0,878
+|14,0%
+|-
+| align="center"|5
+| align="center"|RG4
+| align="center"|1,292
+| colspan=2" align="center"|HR2 PK3
+| align="center"|1,462
+| colspan="2" align="center"|PK1 PK2
+| align="center"|0,527
+| align="center"|HR1
+| align="center"|RG1
+|0,995
+|13,3%
+|-
+| align="center"|6
+| align="center"|RG4
+| align="center"|1,292
+| colspan=2" align="center"|HR2 PK3
+| align="center"|1,667
+| colspan="2" align="center"|PK1 PK2
+| align="center"|0,527
+| align="center"|HR1
+| align="center"|RG1
+|1,134
 |14,0%
 |-
 |}
-	RC1 	RG1 	0.527 	PC1 PC2 	1.462 	RG2 PC3 	1.292 	RC4 	0.995 	13.3%
-	RC1 	RG1 	0.527 	PC1 PC2 	1.667 	RG2 PC3 	1.292 	RC4 	1.134 	14.0%
 	Clutch 	PC1  PC2 	RC2 	RG2 PC3 	1.292 	RC4 	1.292 	13.9%
 	Clutch 	PC1  PC2 	1.462 	RG2 	RC3 	1.462 	13.2%
@@ Zeile 204: / Zeile 226: @@
 ===Anmerkungen===
-    Sun pinions are labeled from right to left in the hub (left to right in the table, right to left in the sectional view).
+*    Sun pinions are labeled from right to left in the hub (left to right in the table, right to left in the sectional view).
-    If the hub behaves oddly or makes noises in some gears and not others, the table above can help to identify which parts may be responsible.
+*    If the hub behaves oddly or makes noises in some gears and not others, the table above can help to identify which parts may be responsible.
-    When RC1 and RC2 are not being used to drive, they are overrun, introducing a small parasitic drag.
+*    When RC1 and RC2 are not being used to drive, they are overrun, introducing a small parasitic drag.
-    When S2 or S3 are not locked, they turn (usually backwards) on the axle, not introducing an appreciable parasitic drag.
+*    When S2 or S3 are not locked, they turn (usually backwards) on the axle, not introducing an appreciable parasitic drag.
-    When S4 is locked, RC3 is overrun (giving a small parasitic drag).
+*    When S4 is locked, RC3 is overrun (giving a small parasitic drag).
-    When S4 is not locked (and RC3 takes drive to the hub shell) RC4 is not overrun; instead S4 turns backwards on the axle with low parasitic drag.
+*    When S4 is not locked (and RC3 takes drive to the hub shell) RC4 is not overrun; instead S4 turns backwards on the axle with low parasitic drag.
 ==Schalten==