Cookie Consent by Free Privacy Policy Generator

Shimano Nexus Sieben-Gang-Naben: Unterschied zwischen den Versionen

(→‎Siehe auch: ergänzt)
Zeile 137: Zeile 137:


==Ein bestehendes Fahrrad umrüsten==
==Ein bestehendes Fahrrad umrüsten==
In einige Fällen ist es möglich, ein existierendes Fahrrad auf eine Nexus Nabe umzurüsten. Sheldon Brown besaß ein sehr schönen 1970er Raleigh Competition Rennrahmen, den er auf eine Nexus Siebengang-Nabenschaltung umgesrüstet hat.


In some cases, it is possible to convert an existing bicycle to use a Nexus hub. I have a very nice 1970's Raleigh Competition racing frame which I have converted into a Nexus 7-speed.
[[Datei:Rasb-superbe.jpg|center|Sheldon Browns Nexus Raleigh Competition]]
Sheldon Brown's Nexus Raleigh Competition
 
;Siehe auch
* [https://www.sheldonbrown.com/org/raleigh-competition/index.html Über das Raleigh Competition Sheldon Browns]


Sheldon Brown's Nexus Raleigh Competition
==Mein erstes Nexus Sieben-Gang Fahrrad==
==Mein erstes Nexus Sieben-Gang Fahrrad==
I purchased a Shimano SG-7R40 hub, and installed it on one of my own bicycles, an early '70's Peugeot PX-10 racing bike. My initial impression on actually using one was extremely favorable. I particularly like the RapidFire control unit, which is very easy to use and has a very light touch. I also am pleased at how well-protected the linkage to the hub is. This hub uses a rotating ring operated by the cable, inboard of the chainstay. There are no delicate parts protruding out past the frame, as with other internal-gear hubs. I find the range of gears quite pleasant to use, and the efficiency of the hub doesn't appear to be any worse than the Sturmey-Archer FM four-speed unit it replaced.
I purchased a Shimano SG-7R40 hub, and installed it on one of my own bicycles, an early '70's Peugeot PX-10 racing bike. My initial impression on actually using one was extremely favorable. I particularly like the RapidFire control unit, which is very easy to use and has a very light touch. I also am pleased at how well-protected the linkage to the hub is. This hub uses a rotating ring operated by the cable, inboard of the chainstay. There are no delicate parts protruding out past the frame, as with other internal-gear hubs. I find the range of gears quite pleasant to use, and the efficiency of the hub doesn't appear to be any worse than the Sturmey-Archer FM four-speed unit it replaced.
15.322

Bearbeitungen