Montage und Justage von Zangenbremsen: Unterschied zwischen den Versionen

Montage und Justage von Zangenbremsen (Quelltext anzeigen)

43 Bytes hinzugefügt , 4. Juli 2018

15.322

Bearbeitungen

@@ Zeile 127: / Zeile 127: @@
 A centerpull brake mounted this way will have a slightly odd cable pull and will work best on a tall frame.
 ===Hinterradbremse an Mixte-Streben===
+[[Datei:Mixte-brake.JPG|left|Zangenbremse an Mixtestreben]]
+On a mixte frame, the rear brake may be installed either above or below the middle set of stays. With a centerpull brake, an open cable may run from a cable stop just behind the head tube to the transverse cable, which passes either side of the seat tube. This installation results in an unusually effective rear brake, because there is little wasted motion in the cable. Another common approach on mixte frames is to use a pulley behind the seat cluster to redirect a cable downward to a centerpull brake at the seatstays. The convoluted cable routing results in much inferior brake performance.
-mixte-supercourseOn a mixte frame, the rear brake may be installed either above or below the middle set of stays. With a centerpull brake, an open cable may run from a cable stop just behind the head tube to the transverse cable, which passes either side of the seat tube. This installation results in an unusually effective rear brake, because there is little wasted motion in the cable. Another common approach on mixte frames is to use a pulley behind the seat cluster to redirect a cable downward to a centerpull brake at the seatstays. The convoluted cable routing results in much inferior brake performance.
 ===Zugführung von unten===