Grunderneuerung von Schraubkranzfreiläufen: Unterschied zwischen den Versionen

Here are the small parts: the outer bearing race (the ring which you removed in the first step of disassembly -- here looking at its back side), the shims, and the pawls. These pawls have grooves on the underside to engage the pawl springs. The pawl springs on this SunTour freewheel are attached to pins at their base, and stay in place. The pawl springs of some freewheels will come off too, while in others, the pawls and pawl springs are not removable..

You could now clamp the inner body in a vise by the pawl recesses, and unscrew the wheel. This is how to remove a freewheel when you can't use a freewheel remover. Removing the inner body makes reassembly of some freewheels easier, but there is some possibility of damage from the vise jaws.