Bürokraten, editor, Administratoren
15.340
Bearbeitungen
Unterwegsreparaturen: Unterschied zwischen den Versionen
Aus WikiPedalia
→Hier die Langfassung: Bilder hinzugefügt
(→Hier die Langfassung: Bilder hinzugefügt) |
(→Hier die Langfassung: Bilder hinzugefügt) |
||
| Zeile 50: | Zeile 50: | ||
[[Datei:Y-wrench.jpg|center|Y-Schlüssel mit 8-, 9- und 10 mm Steckschlüssel]] | [[Datei:Y-wrench.jpg|center|Y-Schlüssel mit 8-, 9- und 10 mm Steckschlüssel]] | ||
''Y-Schlüssel''</center> | ''Y-Schlüssel''</center> | ||
* 6-inch adjustable wrench if your bicycle uses nuts and bolts with hex heads -- and to straighten bent parts or lend a helping hand to another cyclist. See Sheldon's article on adjustable wrenches. The adjustable wrench also can remove and replace most pedals -- though many pedals also have an Allen wrench fitting on the inner end of the axle. Keep pedal threads well-greased, because a 6-inch adjustable wrench does not have as much leverage as a purpose-built pedal wrench. | * [[Datei:Adjustable wrench.jpg|right|Engländer]]6-inch adjustable wrench if your bicycle uses nuts and bolts with hex heads -- and to straighten bent parts or lend a helping hand to another cyclist. See Sheldon's article on adjustable wrenches. The adjustable wrench also can remove and replace most pedals -- though many pedals also have an Allen wrench fitting on the inner end of the axle. Keep pedal threads well-greased, because a 6-inch adjustable wrench does not have as much leverage as a purpose-built pedal wrench. | ||
* Crank puller, unless your bicycle uses an Allen wrench to pull the cranks. The Allen wrench is usually 8 mm, and many multi-tools do not include that size. More details are in the article on cotterless cranks. | * Crank puller, unless your bicycle uses an Allen wrench to pull the cranks. The Allen wrench is usually 8 mm, and many multi-tools do not include that size. More details are in the article on cotterless cranks. | ||
[[Datei:Crank-puller.jpg|center|Universeller Kurbelabzieher von Park Tools]] | |||
* A crank bolt wrench like the one shown is currently sold by René Herse Cycles, and fits bolts with 15mm bolt heads -- which are interchangeable with others. More details are in the same article. You need one of these wrenches unless your bicycle uses an Allen wrench to pull the cranks. If the dustcap removes with an Allen wrench, use your multi-tool. For a screwdriver slot, special tools are made, but you can hold the flat-blade screwdriver at a low angle so it reaches from one end to the other of the slot. | * A crank bolt wrench like the one shown is currently sold by René Herse Cycles, and fits bolts with 15mm bolt heads -- which are interchangeable with others. More details are in the same article. You need one of these wrenches unless your bicycle uses an Allen wrench to pull the cranks. If the dustcap removes with an Allen wrench, use your multi-tool. For a screwdriver slot, special tools are made, but you can hold the flat-blade screwdriver at a low angle so it reaches from one end to the other of the slot. | ||
