Felge und Nabe messen, um Speichenlängen zu berechnen: Unterschied zwischen den Versionen

I thank Roger Musson for permission to use the photo below, with cross-sectioned spoke nipples. The spoke threads are the same length in all three examples, but the spoke nipples are of different lengths. A spoke can be threaded in only until the red line in the picture reaches the bottom of the threading in the spoke nipple. Beyond that limit, it will bind. The combination on the left risks breaking the spoke nipple just below the head, because the spoke does not extend up into the head of the nipple. Only the short spoke nipple at the right is really suitable for the spokes shown.

==Siehe auch==

Examples of spoke-threading limitations

Sutherland's Rim Measuring System

==Quelle==

Dieser Artikel basiert auf dem Artikel [Measurements for Spoke Length Calculations https://www.sheldonbrown.com/spoke-length.html] von der Website [https://sheldonbrown.com Sheldon Browns]. Originalautor des Artikels ist [[John Allen]].