Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Felge und Nabe messen, um Speichenlängen zu berechnen: Unterschied zwischen den Versionen
Aus WikiPedalia
Felge und Nabe messen, um Speichenlängen zu berechnen (Quelltext anzeigen)
Version vom 18. Januar 2022, 14:00 Uhr
, 18. Januar 2022→Den Umfang der Felge messen: Bild hinzu
(→Den Außendurchmesser messen: weiter...) |
(→Den Umfang der Felge messen: Bild hinzu) |
||
| Zeile 110: | Zeile 110: | ||
Use the metal tape measure as shown in the image below. | Use the metal tape measure as shown in the image below. | ||
[[Datei:Circum-sm.jpg|center|Messen des Felgenumfangs]] | |||
Here are the steps to measure a rim using the circumference: | Here are the steps to measure a rim using the circumference: | ||
| Zeile 119: | Zeile 119: | ||
If you don't have a narrow tape measure, you could wrap a bicycle cable inner wire around the rim, hooking the ferrule into the valve hole. Mark the wire, stretch it out flat and measure the length. If measuring a built-up wheel with non-recessed spoke nipples, the cable will sit next to them and the measurement is that for a bare rim. | If you don't have a narrow tape measure, you could wrap a bicycle cable inner wire around the rim, hooking the ferrule into the valve hole. Mark the wire, stretch it out flat and measure the length. If measuring a built-up wheel with non-recessed spoke nipples, the cable will sit next to them and the measurement is that for a bare rim. | ||
===Die Tiefe bis zu den Speichenlöchern=== | ===Die Tiefe bis zu den Speichenlöchern=== | ||
