Bürokraten, editor, Administratoren
15.322
Bearbeitungen
Kurbeln ohne Splintbefestigung: Unterschied zwischen den Versionen
Kurbeln ohne Splintbefestigung (Quelltext anzeigen)
Version vom 13. August 2020, 14:36 Uhr
, 13. August 2020→Der universale Kurbelabzieher von Park Tool: besseres Deutsch
(→Staubkappe entfernen... außer: weiter...) |
(→Der universale Kurbelabzieher von Park Tool: besseres Deutsch) |
||
| Zeile 104: | Zeile 104: | ||
When removing a splined crank which attaches with a larger-diameter bolt, you will need either to use a special crank puller made for this purpose, or to place an undersized bolt on the end of the spindle. This must fit entirely inside the splines of the crank. | When removing a splined crank which attaches with a larger-diameter bolt, you will need either to use a special crank puller made for this purpose, or to place an undersized bolt on the end of the spindle. This must fit entirely inside the splines of the crank. | ||
==Der | ==Der universelle Kurbelabzieher von Park Tool== | ||
The closest thing to a universal crank puller is made by Park. This has a reversible, double-ended "nut," with a tip on one end for square-taper cranksets, and on the other end for splined cranksets. The wrench flats are in the middle. This tool will not fit older TA or pre-1982 Stronglight cranks, though. | The closest thing to a universal crank puller is made by Park. This has a reversible, double-ended "nut," with a tip on one end for square-taper cranksets, and on the other end for splined cranksets. The wrench flats are in the middle. This tool will not fit older TA or pre-1982 Stronglight cranks, though. | ||