Reparatur von Ledersätteln

Dieser Artikel kann als Begleitartikel zum Artikel über Ledersättel gelesen werden. Ledersättel lassen sich anders als die meisten Kunststoffsättel reparieren. Ledersättel können drei verschiedene Typen von Defekten haben:

• Der Ledersattel wird durch Missbrauch oder einen Unfall beschädigt
• Der Unterbau kann brechen (zumeist handelt es sich um den Bruch des Sattelgestells).
• Nieten können herausfallen oder korrodieren

Jeder dieser drei Probleme sind lösbar.

Brooks repariert Sättel in seinem Unternehmenssitz in England und es gibt aktuell (im Jahr 2022) drei weitere autorisierte Brooks Reparatur-Ansprechpartner auf der ganzen Welt. Einer davon ist RTI Sports in Koblenz, die vermutlich auch Brooks Garantiebedingungen abbilden können.

Brooks verlängert die Garantiezeit, wenn man seinen Sattel online registriert. Brooks hat ein großes Lager an lieferbaren Ersatzteilen, daher ist die Reparatur auch älterer Sattelmodelle möglich, weil das grundsätzliche Design der Brooks Sättel seit Jahrzehnten unverändert geblieben ist. Reparaturen anderer marken hängen stark davon ab, wie verfügbar die Ersatzteile sind. Am Ende dieses Artikels werden einige Firmen genannt, die Sättel reparieren können.

Ein typischer Reparaturfall ist der Ersatz einer Sattelschiene. Ein Fahrradsammler oder ein Museum könnte das Leder ersetzen wollen, wenn sie ein historisches Fahrrad instand setzen. Zwei Sättel mit unterschiedlichen Defekten können zu einen guten Sattel kombiniert werden.

Manche ältere Brooks-Sättel haben eine Eigenschaft, die es wert ist, den Aufwand das Leder zu tauschen, auf sich zu nehmen. Sie heben Ösen für die Riemen von Satteltaschen wie sie im folgenden Bild abgebildet sind. Neuere Sättel haben Aussparungen im Sattelleder für diese Riemen. Es ist sinnvoll, diese Ösen von verschlissenen Sätteln herauszulösen und wiederzuverwenden. Brooks verkauft sie auch einzeln.

Wer macht Brooks Reparaturen?

U.K. British flag Brooks Downing Street, Smethwick Tel: +81 75 622 7755 B66 2PA, West Midlands, Fax: +81 75 622 7766 England, UK Email: Email Brooks

	Web:	Repair enquiry to Brooks

USA American flag Transport Cycles 1901 S. 9th Street, Rm 107B Tel: +1 215-644-8124 Philadelphia PA 19148 Fax: USA Email: Email Simon at Transport Cycles

	Web:	Transport Cycles Brooks Saddle Repair

Japan Japan flag Diatech Products Yubinbango 612-8042 Fushimi-ku Tel: +81 75 622 7755 KakinokiHama cho address 431 Fax: +81 75 622 7766 Kyoto, Japan Email Email Diatech Products

	Web:	http://www.diatechproducts.com/

Germany German flag RTI Sports Universitätsstraße 2 Tel: +49 (0) 2618 999980 56070 KOBLENZ Fax: +49 (0) 2630 955230 Deutschland Email: Email RTI Sports

	Web:	https://www.rtisports.de/

Selbst durchgeführte Ledersattelrparuren

A home mechanic may also attempt a saddle repair, and it is sometimes possible to cannibalize parts. When a saddle rail broke on a Brooks B17 -- after 30 years of service -- I checked and found that the undercarriage of a Wright's saddle -- Brooks's low-end brand in the 1970s -- was identical except for the finish. I drilled out the rivets from a Wrights saddle and removed its misshapen leather, installed the leather from the B17 and had a perfectly functional saddle again.

To cannibalize saddles in this way, you'll need

an electric drill and bit to drill out rivets, also a centerpunch to start the drill if the rivets don't have a recess on the inside a hammer and flat-ended punch -- an old pedal spindle will do --to mushroom the inner face of rivets; and a sturdy metal surface to use as an anvil. The flat surface at the rear of a bench vise will do. If you drill out the rivets from the inside of the saddle, you are unlikely to damage either the leather or the undercarriage.

Drilling out rivets: the leather of this saddle was dried out and cracked. The undercarriage could use some cleaning up but it is sound.

Drilling rivets

You need only replace the rivets at the rear of the saddle. The metal shoe inside the nose of the saddle comes off with the top, once you have removed the rivets at the rear. Copper rivets suitable for saddle repair are available at hobby shops, online and from the saddle repairers listed in this article. After flattening large rivets at the inside, you may want to pound their edges down at the outside. An anvil may help. Keep reading for detailed isntructions.

Pounding rivets

Preferably, when cannibalizing saddles, use an undercarriage with matching locations of rivet holes. If the sheet-metal piece at the rear of both saddles is of approximately the same shape and width, you could drill new rivet holes -- in the metal, not the leather. The two saddles shown in the next picture are not compatible, because the width is too different.

Saddles of different width

Eine Do-It-Yourself-Anleitung zur Sattelreparatur von Anfang bis Ende

The saddle on the left in the image above is a top-of-the-line Idéale Model 92. The leather is Rodée Main Selon DRebour (broken-in by hand, using the process developed by the great bicycling illustrator Daniel Rebour). Tne aluminum undercarriage cracked around the clamp-bolt hole, and the nose of the saddle would not stay up. These saddles in good shape go for big bucks now. That is all about style and their rarity: the design is flawed. Well, steel saddle rails also do break. In the photo below, I have removed the leather and inserted new rivets.

Idéale model 92 disassembled

The rivet locations and the shoe in the nose of the saddle are identical to those of an Idéale Model 80 with cracked leather that I bought for $26 on eBay. This is what happens if a leather saddle is left out in the rain for years, and never re-oiled

Idéale Model 80 drilled out

Replacement ivets should be a tight fit into the holes in the leather, and just long enough. The scale on the ruler in the photo is in centimeters. The stem of these rivets is about 3 mm or 1/8 inch thick, and about 7 mm or 3/8 inch long. See info above about sourcing rivets.

Rivets

Bottom-of-the-line bottom, meet top-of-the-line top! Here, I have inserted rivets but not yet hammered on them. If I cared about style, I'd have repainted the undercarriage, or had it chromed. It has lasted for decades with no care and only surface rust. I figured that it will outlast the leather, and why bother.

Preferably assemble the front end of the saddle before installing the rivets or bolts at the rear of the saddle. Loosen the nose adjustment to make it easier to fit the rivets. If the nose assembly has come apart, see instructions lower down in this article.

Rivets inside the Frankensaddle

I made an anvil form an old pedal spindle.

Anvil

This let me pound the rivets from both the inside and the outside of the saddle, to expand them inside, then form their heads.

Pounding rivets

TA-DA, the result! The shaping of the rivet heads could be nicer if I had a ball-peen (rounded-head) hammer and better skills, but the saddle is probably good now for as long as the leather lasts.

Finished work on saddle

Bolzen der in der Sattelnase, Gefederter Unterbau

Assembly of the front end of a saddle is a bit of mechanical puzzle, and can be confusing. Install the most common kind of slider at the side, from inside to outside, following the arrow in the photo at the left below. The "wings" of the slider should start facing downward (with the saddle upside-down). Slide the slider around to the front, rotate it into place and insert the nose bolt, with the nut ahead of the slider as shown in the photo at the right.

Getting the nose bolt into place can be difficult if the rails are in place -- though it can sometimes pop out, and if it is adjusted as loose as possible, you may be able to pry it into place with a flat-blade screwdriver, while squeezing the top of the saddle and the rails together with your other hand to tilt the metal shoe at the nose away from the bolt.

Installing clip Clip, bolt and nut installed

With a sprung saddle, you may be able to avoid working with rivets, by disassembling the undercarriage and replacing the broken parts. I did this when the rails broke on a Brooks Flyer.

My Flyer with broken rails Broken rails on Brooks Champion Flyer

When the rails break, the nose bolt and slider come loose. Let's hope that you didn't lose it them the street -- or if you did, you ordered new ones.

I had the nose bolt and slider. I was able to order a new undercarriage from Brooks. This included springs, but it is easier to undo the nuts at the lower end of the old springs and re-use them, because it is possible to turn the bolts at the lower end. Keep the extra springs as spares: springs also have been known to break.

The Flyer saddle has two sets of rails.The set which is closer to the saddle top loops around the nose bolt, as shown in the photos below.

Nose assmbly of Flyer saddle

How the nose bolt secured the upper rails

Nose assemblies may differ. The one in the image below is on a Brooks B72 4-wire saddle. It is a good idea to take a photo before disassembly, as a guide before reassembling.

N9ose of B72 saddle

Re-riveting an unsprung saddle is simple, but getting the wrench past the springs of a sprung saddle can be a bit tricky. Use a thin open-end wrench -- 1/2 inch for the Brooks saddles I've worked on. Getting a nut started is easier if you attach it to the blade of a screwdriver with a dab of grease, to reach in between the coils of a spring.

If a coil of a spring blocks a saddle's bag loop, making it hard to insert a bag strap, loosen the nuts at both top and bottom, rotate the spring, then retighten.

Sheldon strongly recommends not tightening the nose bolt. In his experience, that ruins saddles.

A leather saddle with a repaired undercarriage is as good as new -- no, better than new: it is already broken in!

Siehe auch

Also see the more general article about saddles ...and our article about leather saddles Saddles for sale at Harris Cyclery Brooks, home page Brooks, 10-year warranty registration Gilles Berthoud Lepper Rivet Cycle Works Selle Anatomica Aaron's Bicycle Repair, repair of leather saddles

Quelle

Dieser Artikel basiert auf dem Artikel Leather Bicycle Saddle Repair von der Website Sheldon Browns. Originalautor des Artikels ist John Allen.

Weitere interessante Artikel zum Thema John Allen

• Grunderneuerung von Schraubkranzfreiläufen
• Kunstgriffe beim Messen
• Gute und schlechte Schnellspanner
• Die SRAM DualDrive Schalter und Clickbox
• Felge und Nabe messen, um Speichenlängen zu berechnen
• Sachs und SRAM Nabenschaltungen
• Betriebsanleitungen von Fahrradcomputern und GPS Geräten
• Gewindelehre
• SRAM i-Motion 9 Nabe

Weitere interessante Artikel zum Thema Sattel

• Ein bequemer Sattel
• Ledersättel
• Ledersattel
• Speedic
• Sattelkunde
• Sattel
• Troxel
• Brooks
• Seat Sandwich ®

Weitere interessante Artikel zum Thema Workshop

• Knarzen, Knacken und Quietschen
• Grunderneuerung von Schraubkranzfreiläufen
• Kunstgriffe beim Messen
• Die SRAM DualDrive Schalter und Clickbox
• Felge und Nabe messen, um Speichenlängen zu berechnen
• Konenzentrierung
• Kettenlinie
• Laufradbau
• Wartung von Naben