Sturmey-Archer Naben
In fast allen englischen Dreigang-Fahrrädern sind Sturmey-Archer Hinterradnaben verbaut. Es existieren und existierten viele verschiedene Modelle, sitdem das Unternehmen 1902 gegründet wurde. Sturmey-Archer war bis zum Herbst 2000 eine Abteilung von Raleigh Industires, bis der Mutterkonzern in finanziele Schwierigkeiten kam. Sturmey-Archer wurde durch einige Konzernmanöver heimatlos und man konnte erwarten, dass das Unternehmen auf kurz oder lang bankrott gehen würde. Das land, auf dem die Fabrik stand, wurde verkauft und Sturmey-Archer was kurz davor von einem Firmenausschlachter liquidiert zu werden. Glücklicherweise hat ein taiwanesisches Unternehmen namnes SunRace Sturmey-Archer gerettet und kaufte die letzten noch verbliebenen Firmenanlagen. Der Maschinenpark und das Lager wurde nach Taiwan verschifft. SunRace nahm die Produktion bestehender und einiger neuer Modelle in Taiwan wieder auf.
Sturmey-Archer quality had been on a downward slide since the early 1960s, as the company's engineering efforts shifted from trying to make a better product, as they had been through the first half century, to finding ways to make an acceptable product cheaper. Sturmey-Archer's quality peaked probably in the late '50s.
SunRace spent a great deal of money moving the machinery from England to Taiwan, but when it arrived, it turned out that most of the machinery was worn-out junk, no longer capable of manufacturing parts to the degree of precision appropriate to the 21st century.
I heard an interesting anecdote from a Sturmey-Archer veteran employee, now with SunRace/Sturmey-Archer: Back in the day, sometimes a batch of internal parts would be just a bit out of tolerance, maybe a bit too small, or a bit too large, whatever. The production people would take a sample to the engineering department, where a grey-haired engineer would check it out and often say "Well, it is a bit out of spec, but not really enough to cause failure, so let's let it go."
SunRace didn't have those engineers who had grown up with Sturmey-Archer in their blood, so when they found a batch of out-of-spec parts, they would say "That's out of spec! Melt it down, and make new ones, and do it right this time!"
In any case, the quality of Taiwanese production from SunRace/Sturmey-Archer so far has been excellent, generally better than the quality of later English production. Sturmey-Archer's selection of multi-speed hubs is much wider than that of the other manufacturers. Sturmey-Archer hubs tend to be lighter than the competitors'. SunRace has also introduced many new models, including an 8-speed internal-gear hub, a fixed-gear three-speed and an updated version of the Dynohub generator. Many Sturmey-Archer hubs -- even the 8-speed -- can fit the narrow dropout spacings of older bicycles. .
Some folks don't believe that the Taiwanese can make stuff as well as the British did, but there's no factual basis for that belief, and in many cases this attitude may be traced to racism.
Aktuelle Sturmey-Archer Modelle und die meisten anderen seit den 1930er Jahren
Tabellenzellen, die rosa hinterlegt sind, deuten auf aktuelle Modelle (ab 2009) hin.
Schnellzugriff | ||
---|---|---|
Zwei Gänge | Drei Gänge | Vier Gänge |
Fünf Gänge (1967-2008) | Fünf Gänge (ab 2009) | Sieben Gänge |
Acht Gänge | Ein Gang Bremsnaben | Vorderradnaben |
Individuelle Modelle Verlinkte individuelle Modelle sind zumeist älteren Baujahres. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
AB | AB/C | AC | AG | AM | AR | ASC | AT3 | AW | AWC | BF | BFC |
BF/C | BFT | BR | BRC | BRT | FB | FC | FG | FM | FW | GH6 | K |
KB | KBC | KS | KSW | KT | KTC | S5 | S5-2 | S3C | SAB3 | SBF | SBR |
Sprinter S5 | Sprinter 7 | ST | SW | T | TB | TBC | TBF | TBFC | TCW | TF | VT |
Naben mit Nabenschaltung
Zwei Gänge
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
B2C |
2 | Wide | 138 100 |
2-speed kickback hub, coaster brake, steel shell. Also see coaster-brake page. |
S2C |
2 | Wide | 138 100 |
2-speed kickback hub, coaster brake, aluminum shell. Also see coaster-brake page. |
S2 |
2 | Wide | 138 100 |
2-speed kickback hub, no brake, aluminum shell. |
S2 (1960) |
2 | Wide | 100 71.4 |
Note, same model number as new S2 but different ratios. 1960s model with kickback shifting |
T |
2 | Medium | 100 75 |
A rare 1930s model, made for club bicycles and tandems. If you have a fast connection, you can see |
TB |
2 | Wide | 100 75 |
A rare 1930s two-speed hub with cable/rod-operated drum brake. Similar to TBC If you have a fast connection, you can see |
TBC |
2 | Wide | 100 75 |
A rare 1930s two-speed hub with cable-operated drum brake. Similar to TB If you have a fast connection, you can see |
TBF |
2 | Wide | 100 75 |
A rare 1930s fixed gear two-speed hub with cable/rod-operated drum brake. Similar to TBFC If you have a fast connection, you can see |
TBFC |
2 | Wide | 100 75 |
A rare 1930s fixed gear two-speed hub with cable-operated drum brake. Similar to TBF If you have a fast connection, you can see |
TC |
2 | Close | 100 86.54 |
A rare 1930s model, made for club bicycles. See: sa-1938f2.jpeg (176k) |
TF |
2 | Medium | 100 75 |
A rare 1930s fixed gear model, made for club bicycles and tandems. The fixed-gear version of the T Sturmey-Archer TF |
Drei Gänge
- Siehe auch
Wartung von Sturmey-Archer Dreigangnaben
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
AB |
3 | Wide | 133.3 100 75 |
Basically an AW, with cable-operated drum brake. |
AB3 |
3 | Wide | 133.3 100 75 |
With cable-operated 90 mm drum brake. Still sold in 2010. |
AB/C |
3 | Wide | 133.3 100 75 |
With cable-operated 90 mm drum brake. Still sold in 2010. |
AC |
3 | Close | 106.66 100 93.3 |
A rare model, made for club bicycles, time trials. |
AG |
3 | Wide | 133.3 100 75 |
Basically, an AW with a built-in Dynohub generator. |
AM |
3 | Medium | 115.55 100 86.54 |
A rare model, made for club bicycles. |
AR |
3 | Ultra Close | 107.24 100 93.24 |
A very rare 1930's model, made for club/racing bicycles.
Sturmey-Archer AR If you have a fast connection, you can see sales brochures for this model. |
ASC |
3 | Close | 100 90 75 |
Fixed gear. Extremely rare, and lots of fun! This site has two separate pages devoted to this hub: See the main ASC Page for general info, and the ASC Tech Page for service instructions, cutaway and exploded diagrams.
In 2010, SunRace/Sturmey Archer has introduced a new 3-speed fixed gear hub, the S3X |
AT3 |
3 | Wide | 133.3 100 75 |
"Elite" 70 mm drum brake and no-intermediate-gear (no neutral) internals. "Elite" indicates a hub with an aluminium shell. |
AW |
3 | Wide | 133.3 100 75 |
This is far and away the most common model, introduced in 1936. No-neutral-gear version still sold in 2010 --75th anniversary is coming up in 2011! Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
AWC |
3 | Wide | 133.3 100 75 |
Three speed coaster brake. No-neutral-gear version. Steel shell. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
AWC(II) |
3 | Wide | 133.3 100 75 |
Slight modification to the AWC. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
CS-RF3 |
3 | Wide | 133.3 100 75 |
Hybrid gearing, fits a Shimano or SRAM 8- or 9-speed cassette. |
BWR |
3 | Extra-wide | 63.8 100 156.7 |
Special Brompton extra wide-ratio 3-speed used with 2 sprockets and a rear derailer to make a 6-speed hybrid-gearing system. |
CS-RK3 |
3 | Wide | 133.3 100 75 |
Hybrid gearing, fits a Shimano or SRAM 8- or 9-speed cassette. Disk brake fitting |
K |
3 | Wide | 133.3 100 75 |
The immediate predecessor of the AW
If you have a fast connection, you can see sales brochures for this model. |
KB |
3 | Wide | 133.3 100 75 |
With rod-operated drum brake. (Similar to the KBC)
If you have a fast connection, you can see sales brochures for this model. |
KBC |
3 | Wide | 133.3 100 75 |
With cable-operated drum brake. 1930's predecessor to the AB
Sturmey-Archer KBC If you have a fast connection, you can see sales brochures for this model. |
KS |
3 | Close | 112.5 100 89.9 |
A rare 1930s model, made for club bicycles and tandems.
Sturmey-Archer KS If you have a fast connection, you can see sales brochures for this model. |
KSW |
3 | Medium | 116.6 100 85.7 |
A rare 1930s model, made for club bicycles and tandems.
Sturmey-Archer KS If you have a fast connection, you can see sales brochures for this model. |
KT |
3 | Wide | 133.3 100 75 |
Tandem hub with cable/rod-operated drum brake. Similar to KTC
Sturmey-Archer KT If you have a fast connection, you can see sales brochures for this model. |
KTC |
3 | Wide | 133.3 100 75 |
Tandem hub with cable-operated drum brake. Similar to KT
If you have a fast connection, you can see sales brochures for this model. |
QS-RC3 |
3 + reverse | Wide | 133.3 100 75 |
Coaster brake, aluminum shell, reverse gear and second sprocket, made for a tricycle. This is a gearbox, not a hub and must be used in an intermediate position on the frame, with two chains, because the secondary sprocket attaches where the spokes would. |
RS-RF3 |
3 | Wide | 133.3 100 75 |
New version similar to the AW, with an aluminum shell. Rotary shifting interface inside the dropout; no brake. |
RX-RD3 |
3 | Wide | 133.3 100 75 |
New version similar to the AW, with an aluminum shell. Rotary shifting interface inside the dropout; 70mm drum brake |
SAB3 |
3 | Wide | 133.3 100 75 |
Steel shell, 70mm drum brake. No-intermediate-gear mechanism. Still sold in 2010 |
SBR |
3 | Wide | 133.3 100 75 |
"Steelite" with 70 mm drum brake.
"Steelite" indicates a hub with a steel shell. |
S3C |
3 | Wide | 133.3 100 75 |
Coaster brake. After Consumer Reports rated the TCW IV "unacceptable" because the brake would fail completely if the shift cable was misadjusted, Sturmey-Archer completely redesigned the Tricoaster, so that the braking was independent of the gear-change. This model is safer than the TCW series, but is still prone to failure. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
S3X |
3 | Mid | 100 75 62.5 |
SunRace/Sturmey-Archer's new-production 3-speed fixed gear, supplanting the rare ASC. A matching front hub, the HBT, is available. |
S-RC3 |
3 | Wide | 133.3 100 75 |
Aluminum-shell version of the AWC(II), with coaster brake. |
S-RF3 |
3 | Wide | 133.3 100 75 |
New version similar to the AW, with an aluminum shell. Improved pullchain interface; no brake. |
SW |
3 | Superwide | 138.4 100 72.23 |
This model was intended to replace the AW in 1957, but was so troublesome that it was withdrawn, and the AW re-introduced in 1958. The SW uses a unique 3-prong driver, and has crescent shape pawls that don't use pawl springs. When they work, they're very nice. They are light, nearly silent, and efficient. None of the internal parts are interchangeable with other models. See Brian Hayes's article on this site. |
SX-RB3 |
3 | Wide | 133.3 100 75 |
Wide-body 3-speed (for wide dropout spacing) with threads on left side for band brake drum or sprocket. |
SX-RK3 |
3 | Wide | 133.3 100 75 |
Wide-body 3-speed (for wide dropout spacing) with fitting for brake disk. |
TCW |
3 | Wide | 133.3 100 75 |
Coaster brake. Mark I, II, III, IV. Unreliable, replaced by the S3C. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
TS-RC3 |
3 + reverse | Wide | 133.3 100 75 |
Coaster brake, high-polish aluminum shell, reverse gear and second sprocket: made for a tricycle. This is a gearbox, not a hub, and must be used in an intermediate position on the frame, with two chains, because the second sprocket attaches at the spoke holes on the right side. |
TS-RF3 |
3 | Wide | 133.3 100 75 |
No brake, high-polish aluminum shell, reverse gear and second sprocket: made for a tricycle. This is a gearbox, not a hub, and must be used in an intermediate position on the frame, with two chains, because the second sprocket attaches at the spoke holes on the right side. |
XL-RD3 |
3 | Wide | 133.3 100 75 |
90 mm drum brake, aluminum shell. |
X-RD3 |
3 + reverse | Wide | 133.3 100 75 |
70 mm drum brake, aluminum shell. |
Vier Gänge
- Siehe auch
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
FB |
4 | Wide | 126.6 100 79.9 66.67 |
With cable-operated drum brake. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
FC |
4 | Close | 109.1 100 90 75 |
A rare model, made for club bicycles. |
FG |
4 | Wide | 126.6 100 79.9 66.67 |
Basically an FW with a built-in Dynohub generator.
I have one of these on my 1954 Superbe Roadster. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
FM |
4 | Medium | 112.5 100 85.7 66.7 |
A rare model, made for club bicycles. |
FW |
4 | Wide | 126.6 100 78.9 66.67 |
The most common four-speed model. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
Fünf Gänge (1967-2008)
- Siehe auch
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
5-speed alloy |
5 | Wide | 150 126.6 100 78.9 66.67 |
An S5-2 with a beefy alloy shell; late UK production. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
5-Star |
5 | Wide | First single-cable 5-speed hub -- a problem hub. | |
5-Star drum brake |
5 | Wide | Single cable, with drum brake -- a problem hub. | |
AB-5 |
5 | Wide | Steel shell, 90 mm drum brake, introduced ca. 1999 | |
AT5 |
5 | Wide | Aluminum shell, 70 mm drum brake, single cable; introduced in 1993 | |
S5 |
5 | Wide | The earliest 5-speed hub, a modified FW. The original S5 used two cables, a conventional 3-speed type on the right, and a bellcrank/pushrod unit on the left. The right lever/cable has 3 positions, and works as a normal 3-speed hub. The left lever/cable converts the hub from a medium ratio to a wide ratio 3-speed. Since the middle gear is direct drive, the left control has no effect on the middle gear.
Most, if not all Sturmey-Archer 4-speeds can be converted to 5-speeds. The planet cage is the same but the axle and large sun gear must be replaced so they engage in both directions. See additional information. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. | |
S5/1 |
5 | Wide | Replaced the S5; used two pullchains rather than having a bell crank on the left side. Unreliable, tended to pop out of low gear. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. | |
S5-2 |
5 | Wide | Improved, reliable version of the S5/1. The S5-2 has a bit more internal friction than the plain S5. Axle assembly and axle gears are different. Also see rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. | |
SAB-5 |
5 | Wide | 70 mm drum brake | |
S-RC5 |
5 | Wide | Aluminum shell, ball locking. | |
Sprinter S5 |
5 | Wide | 5-speed single-cable; introduced 1993-1994 | |
Sprinter S5 Elite |
5 | Wide | Aluminum shell 5-speed single-cable, introduced 1993-1994 | |
Sprinter S5C Coaster |
5 | Wide | 5-speed single-cable with coaster brake, introduced 1993-1994 | |
S-RC5 |
5 | Wide | Ball locking mechanism ca. 1999, coaster brake | |
S-RF5 |
5 | Wide | Ball locking mechanism ca. 1999 | |
S-RK5 |
5 | Wide | Ball locking mechanism ca. 1999, disk brake fitting | |
X-RC5 |
5 | Wide | Ball locking mechanism ca. 1999, coaster brake | |
X-RD5 |
5 | Wide | Ball locking mechanism ca. 1999, drum brake, large flanges | |
X-RF5 |
5 | Wide | Ball locking mechanism ca. 1999, no brake, large flanges | |
X-RK5 |
5 | Wide | Ball locking mechanism ca. 1999, disk brake fitting,large flanges |
Fünf Gänge (ab 2009)
- Siehe auch
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
QS-RC5 |
5+ reverse | Wider | 160 133.3 100 75 62.5 |
Wider ratio, introduced 2009, coaster brake, reverse rear and second sprocket. This is a gearbox, not a hub, and must be used in an intermediate position on the frame, with two chains, because there is a bracket that goes across where the spokes would be. |
S5C(W) |
5 | Wider | Wider ratio, introduced 2009, coaster brake, steel shell. | |
S-RC5(W) |
5 | Wider | Wider ratio, introduced 2009, coaster brake, aluminum shell | |
S-RF5(W) |
5 | Wider | Wider ratio, introduced 2009, no brake, aluminum shell | |
XL-RD5(W) |
5 | Wider | Wider ratio, introduced 2009, 90 mm drum brake, aluminum shell | |
X-RC5(W) |
5 | Wider | Wider ratio, introduced 2009, coaster brake, large-flange aluminum shell | |
X-RD5(W) |
5 | Wider | Wider ratio, introduced 2009, 70 mm drum brake, aluminum shell | |
X-RF5(W) |
5 | Wider | wider ratio, introduced 2009, no brake, large-flange aluminum shell | |
X-RK5(W) |
5 | Wider | wider ratio, introduced 2009, disk brake fitting, large-flange aluminum shell |
Sieben Gänge
- Siehe auch
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
AT7/Sprinter 7 Elite |
7 | Wide | 168 145 124 100 80 69 60 |
7-speed single cable with drum brake. See also my article on 4, 5 and 7-speed Sturmey-Archer hubs |
Sprinter 7 |
7 | Wide | 7-speed single cable, steel shell. | |
Sprinter 7 Coaster |
7 | Wide | 7-speed single cable with coaster brake. | |
X-R7 |
7 | Wide | Different appearance, ball locking sun gears, otherwise like the Sprinter 7. | |
X-RC7 |
7 | Wide | Different appearance, ball locking sun gears, otherwise like the Sprinter 7 Coaster. | |
X-RD7 |
7 | Wide | Different appearance, ball locking sun gears, otherwise like the AT7. |
Acht Gänge
- Siehe auch
Model | Speeds | Range | Gears(%) | Features |
---|---|---|---|---|
X-RD8 |
8 | Mid | 305 238 210 186 164 145 128 100 |
Discontinued, drum brake |
X-RF8 |
8 | Mid | Discontinued, no brake. | |
XRD8 |
8 | Wide | Discontinued, internal drum brake. | |
X-RK8 |
8 | Mid | Discontinued, fitting for disk brake | |
X-RR8 |
8 | Mid | Discontinued, roller brake | |
S80(W) |
8 | Wide | 325 250 220 192 169 148 130 100 |
Current model, 2010, no brake, steel shell. Only gears up, especially suitable for small-wheel bicycles. |
X-RF8(W) |
8 | Wide | Current model, 2010, no brake. | |
X-RD8(W) |
8 | Wide | Current model, 2010, internal drum brake. | |
X-RK8(W) |
8 | Wide | Current model, 2010, fitting for disk brake |
Ein Gang Bremsnaben
Model | Features |
---|---|
BR |
Drum brake for rod operation (similar to BRC)
If you have a fast connection, you can see sales brochures for this model. |
BRC |
Drum brake for cable operation (similar to BR)
If you have a fast connection, you can see sales brochures for this model. |
BRD |
Drum brake for rod operation (derailer-compatible version of BR)
If you have a fast connection, you can see sales brochures for this model. |
BRCD |
Drum brake for cable operation (derailer-compatible version of BRC)
If you have a fast connection, you can see sales brochures for this model. |
BRT |
Tandem drum brake for cable operation (similar to BRC)
If you have a fast connection, you can see sales brochures for this model. |
SAB |
"Steelite" 70 mm drum brake for cable operation |
SC |
Coaster brake. See rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
SC1 |
Coaster brake. See rebuilding instructions in Sutherland's Handbook of Coaster Brake and Internally Geared Hubs. |
ST |
"Elite" (aluminum shell) 70 mm drum brake for cable operation |
X-RD |
Freewheel hub with 90 mm drum brake, 2010 production |
X-RDC |
Cassette hub with 90mm drum brake, 2010 production |
Vorderradnaben
Model | Features |
---|---|
BF |
Formerly, drum brake for rod operation (similar to BFC) Now this name is used for a 90mm cable-operated drum brake (current model). If you have a fast connection, you can see |
BFC |
Drum brake for cable operation (similar to BF). If you have a fast connection, you can see |
BF/C |
90 mm drum brake for cable operation (current model is called the BF but refers to this one's technical info.) |
BFT |
Tandem drum brake for cable operation (similar to BFC) If you have a fast connection, you can see |
HBT |
Front track hub to match the S3X fixed-gear hub. Available in several colors. |
GH6 |
Front hub with built-in Dynohub generator. |
SBF |
70 mm "Steelite" drum brake for cable operation (current model) |
VT |
70 mm "Elite" drum brake for cable operation |
X-FD |
Front hub with 70mm drum brake. |
X-FDD |
Front hub with 70mm drum brake and new-model Dynohub generator. |
XL-FD |
Front hub with 90mm drum brake |
XL-FDD |
Front hub with 90mm drum brake and new-model Dynohub generator. |
X-SD |
Front single-side (tadpole tricycle front) hub with 70mm drum brake. |
XL-SD |
Front single-side (tadpole tricycle front) hub with 90mm drum brake. |
Siehe auch
- Wartung von Sturmey-Archer Dreigangnaben
- Wartung von Sturmey-Archer Vier-, Fünf- und Siebengangnaben
- Wartung von Sturmey-Archer Achtgangnaben
- Modell und Produktionsjahbestimmung von Sturmey-Archer Nabenschaltungen
- Techniktipps zu Sturmey-Archer Nabenschaltungen
- Sturmey-Archer Web site -- information on current hubs
- Sturmey-Archer Heritage Web site -- information on hubs from 1902 through 2000.
- Tony Hadland's Web Sturmey-Archer pages-- detailed history through 2000, and technical information
Quelle
Dieser Artikel basiert auf dem Artikel Sturmey-Archer Bicycle Hubs von der Website Sheldon Browns. Originalautor des Artikels ist Sheldon Brown.